List of Alerts

This page lists all the alerts generated by the Weka system, along with possible actions to take.

Name	Description	Actions
AdminDefaultPassword	The admin password is still set to the factory default.	Change the admin user password to ensure only authorized users can access the cluster.
AgentNotRunning	The Weka local control agent is not running on a host.	Restart the agent with service weka-agent start.
ApproachingClientsUnavailability	Approaching the maximum amount of clients that can connect with the current cluster resources.	Make sure all backhand servers are up or expand the cluster with more backend servers.
AutoRemoveTimeoutTooLow	Stateless Client auto-remove timeout too low.	Remount the host with a higher auto-remove timeout value.
BackendNumaBalancingEnabled	A host has automatic NUMA balancing enabled which can negatively impact performance.	To disable, run echo 0 > /proc/sys/kernel/numa_balancing on the backend host.
BackendVersionsMismatch	There are mismatching versions of backend servers in the cluster.	Upgrade all the backend servers to match the cluster's version.
BondInterfaceCompromised	The host is configured to work with a highly available network, but has lost the connectivity redundancy. A single network failure can disconnect the host from the cluster, which will result in the unavailability of data to the host (in case of a client host) or data protection reduced redundancy (in case of a backend host).	Check the network configuration, cables, NICs to resolve the issue.
BucketHasNoQuorum	Too many compute nodes are down, causing the bucket compute resource to be unavailable.	Check that the compute nodes and their hosts are up and running and fully connected; Contact the Weka Support Team if the issue is not resolved.
BucketUnresponsive	A compute resource has failed, causing system unavailability.	Check that the compute nodes and their hosts are up and running and fully connected; Contact the Weka Support Team if the issue is not resolved.
ChokingDetected	High congestion level detected in the cluster.	For more information, refer to System Congestion.
ClientNumaBalancingEnabled	A host has automatic NUMA balancing enabled which can negatively impact performance.	To disable, run echo 0 > /proc/sys/kernel/numa_balancing on the client host.
ClientVersionsMismatch	There are clients with a version that does not match the cluster version. Some features may not be available until all the clients are upgraded.	Upgrade clients to be in the same version as the cluster by locally running weka local upgrade.
ClockSkew	The clock of a host is skewed in relation to the cluster leader, with a time difference more than the permitted maximum of 30 seconds.	Make sure NTP is configured correctly on the hosts and that their dates are synchronized.
CloudHealth	A host cannot upload events to the Weka cloud.	Check the host has Internet connectivity and is connected to the Weka cloud as explained in the Weka Support Cloud section.
CloudStatsError	Statistics upload to Weka cloud failed.	Check the host has Internet connectivity and is connected to the Weka cloud as explained in the Weka Support Cloud section.
ClusterInitializationError	The cluster has encountered an error while initializing.	Fix the underlying problem causing the error to successfully start IO operations.
ClusterIsUpgrading	Cluster is upgrading.	If the upgrade doesn't finish normally, contact the Weka support for assistance.
CPUFrequentStarvation	CPU frequent starvation detected in the last minute.	Check the relevant hosts logs for potential hardware problems or core allocation issues.
CPUStarvation	Weka processes are experiencing long CPU stalls.	Check the relevant hosts logs for potential hardware problems.
DataIntegrity	Data integrity issue found.	Contact the Weka support team.
DataProtection	Some of the system's data is not fully redundant.	Check which node/host/drive is down and act accordingly.
DedicatedWatchdog	A dedicated Weka host requires the installation of a watchdog driver.	Make sure a watchdog is available at /dev/watchdog. For more information, search the Weka knowledgebase in the Weka support portal.
DriveDown	A drive is not responding.	Contact the Weka support team to check if the drive should be replaced.
DriveEndurancePercentageUsed	Drive exceeding its life expectancy.	It is recommended to replace the drive before it fails.
DriveEnduranceSparesRemaining	Drive internal spares running too low.	It is recommended to replace the drive before it fails.
DriveNeedsPhaseout	A drive has too many errors.	Phase-out the drive and probably replace it.
FilesystemHasTooManyFiles	The filesystem storage configuration for the size of file and directory entries is exceeding (or about to exceed).	Increase the max-files for the filesystem.
FilesystemsThinProvisioningReserveReached	The request reserved capacity (for filesystem creation/expansion) is available.	The reserved capacity can now be used for filesystems creation/expansion.
HangingIOs	Some IOs are hanging on the node acting as a driver/NFS/backend.	Check that the compute nodes and their hosts are up and running, and fully connected. Also check that if a backend object store is configured, it is connected and responsive. Contact the Weka Support Team if the issue is not resolved.
HighDrivesCapacity	The average capacity of the SSDs is too high.	Free-up space on the SSDs or add more SSDs to the cluster. To add SSDs, see Expansion of specific resources.
HighLevelOfUnreclaimedCapacityInObjectStore	High level of unreclaimed space in object store.	Check object store connectivity and deletion operations' progress. Validate authorization of deletion operations on the object store. Run weka fs tier capacity for details.
JumboConnectivity	A host cannot send jumbo frames to any of its cluster peers.	Check the host network settings and the switch to which it is connected, even if Weka seems to be functional since this will improve performance.
KmsError	KMS Error	Review the KMS credentials, permissions, and configuration, as suggested in KMS management.
LegacyObsData	Legacy v3.4 data found in object-store.	This legacy data format is deprecated, and will not be supported in v3.15. The filesystem must be detached or removed before upgrading to v3.15.
LicenseError	A license conflict exists.	Make sure the cluster is using a correct license, the license has not expired, and the cluster allocated space does not exceed the license.
LowDiskSpace	The host has low disk space (for /opt/weka directory) which can affect some weka reporting services.	Free up space on the host, or contact the Weka Support Team.
ManualOverridesActive	Manual overrides are active.	Please contact the Weka Support Team.
MismatchedDriveFailureDomain	The drive failure domain does not match the failure domain of its attached host.	Either connect the mismatched drive to a host with a matching failure domain, or re-provision the drive to erase its failure domain.
NegativeUnprovisionedCapacity	Weka capacity usage changes detected due to cluster upgrade.	One or more of the filesystems need to be resized in order to reclaim capacity. Contact the Weka Support Team.
NetworkInterfaceLinkDown	A Network interface has a link down status.	Check the connectivity to the down interface and see if there is anything blocking it.
NoClusterLicense	No license is assigned to the cluster.	Obtain and install a license from get.weka.io.
NodeBlacklisted	There is a blacklisted node in the cluster.	Use weka debug blacklist disable to whitelist nodes so they can rejoin the cluster.
NodeDisconnected	A node is disconnected from the cluster.	Check network connectivity to make sure the node can communicate with the cluster.
NodeNetworkUnstable	A node seems to have an unstable network. As a consequence, it has been fenced by the system and does not contribute resources to the Weka cluster.	Make sure there is no network connectivity issue in the cluster. Contact the Weka Support Team if the issue is not resolved.
NodeRDMANotActive	RDMA is supported on the host but it is inactive.	Make sure Mellanox OFED version 4.6 or higher is properly installed on the host and there is at least one RDMA capable device.
NodeTieringConnectivity	A node cannot connect to an object-store.	Check connectivity with the object store and make sure the node can communicate with it.
NotEnoughActiveDrives	Reduced data protection.	Check connectivity, host status, replace problematic drives, and/or expand the cluster with new failure domains.
OfedVersions	A host Mellanox OFED version ID does not match the one used by the Weka container.	Install a supported OFED. If the current version needs to be retained or the alert continues after a supported version is installed, contact the Weka Support Team.
PartialConnectivityTrackingDisabled	The cluster's partial connectivity tracking mechanism is disabled, affecting the cluster's self-healing capabilities.	Contact the Weka Support Team.
PartiallyConnectedNode	A node seems to be only partially connected.	Make sure there is no network connectivity issue. Contact the Weka Support Team if the issue is not resolved.
PassedClientsAvailabilityThreshold	Reached Clients Limit	Add more backend servers to the cluster, check whether backends are down, or disconnect some clients.
PerformanceDegradedLowRAM	The host is running low on RAM. Additional Metadata entries are swapped to the SSD. This might impact performance.	Make sure all the compute hosts and processes are up, add more hosts to the Weka cluster, or the configured RAM of the cluster backend hosts.
QuotasHardLimitReached	There are directory quotas that have reached their hard limit.	Run weka fs quota list to see which directory quotas have reached their hard limit.
QuotasSoftLimitReached	There are directory quotas that have reached their soft limit.	Run weka fs quota list to see which directory quotas have reached their soft limit.
ResourcesNotApplied	There are changes to host resources that are not applied in the Weka cluster.	To apply changes run weka cluster host apply <host_id>
SSDCapacityDiscrepancy	Used SSD capacity mismatches the expected range	Monitor COMPUTE processes' stability, contact the Weka Support Team.
SystemDefinedTLS	The Weka cluster uses an auto-generated self-signed certificate.	Run weka security tls set to replace the auto-generated certificate with your own certificate for cluster TLS use.
TLSCertificateExpired	TLS Certificate has expired.	Replace the current certificate using weka security tls set
TLSCertificateExpiresSoon	TLS Certificate is about to expire.	Replace the current certificate using weka security tls set
TieredFilesystemOverfillingSSD	Tiered filesystems' SSD Capacity overfilling.	Resolve tiering connectivity issues or increase the upload bandwidth.
TraceDumperDown	Trace dumper is down	Contact the Weka Support Team to restart the trace dumper.
TracesDisabled	Traces are disabled.	To turn them back on contact the Weka Support Team.
TracesFreezePeriodActive	A trace freeze period is active.	Some traces can be protected from rotating for a period of time to debug the system. This is done by the Weka Support Team when needed. If the issue persists after the case has been resolved please contact the Weka Support Team.
UdpModePerformanceWarning	The backend host is configured in UDP mode.	If this is a misconfiguration use weka cluster host net addto add network devices to this host.