Manually configure the WEKA cluster using the resource generator
Detailed workflow for manually configuring the WEKA cluster using the resource generator in a multi-container backend architecture.
Perform this workflow using the resource generator only if you are not using the automated WMS, WSA, or WEKA Configurator.
The resource generator generates three resource files on each server in the /tmp directory: drives0.json, compute0.json, and frontend0.json. Then, you create the containers using these generated files of the cluster servers.
Before you begin
Download the resource generator from the GitHub repository to your local server: https://github.com/weka/tools/blob/master/install/resources_generator.py.
Example:
Copy the resource generator from your local server to all servers in the cluster.
Example for a cluster with 8 servers:
To enable execution, change the mode of the resource generator on all servers in the cluster.
Example for a cluster with 8 servers:
Workflow
1. Remove the default container
Command: weka local stop default && weka local rm -f default
Stop and remove the auto-created default container created on each server.
2. Generate the resource files
Command: resources_generator.py
To generate the resource files for the drive, compute, and frontend processes, run the following command on each backend server:
./resources_generator.py --net <net-devices> [options]
The resource generator allocates the number of cores, memory, and other resources according to the values specified in the parameters.
The best practice for resources allocation is as follows:
1 drive core per NVMe device (SSD).
2-3 compute cores per drive core.
1-2 frontend cores if deploying a protocol container. If there is a spare core, it is used for a frontend container.
Minimum of 1 core for the OS.
Example 1: according to the best practice
For a server with 24 cores and 6 SSDs, allocate 6 drive cores and 12 compute cores, and optionally you can use 2 cores of the remaining cores for the frontend container. The OS uses the remaining 4 cores.
Run the following command line:
./resources_generator.py --net eth1 eth2 --drive-dedicated-cores 6 --compute-dedicated-cores 12 --frontend-dedicated-cores 2
Example 2: a server with a limited number of cores
For a server with 14 cores and 6 SSDs, allocate 6 drive cores and 6 compute cores, and optionally you can use 1 core of the remaining cores for the frontend container. The OS uses the remaining 1 core.
Run the following command line:
./resources_generator.py --net eth1 eth2 --drive-dedicated-cores 6 --compute-dedicated-cores 6 --frontend-dedicated-cores 1
Contact Professional Services for the recommended resource allocation settings for your system.
Parameters
compute-core-ids
Specify the CPUs to allocate for the compute processes. Format: space-separated numbers
compute-dedicated-cores
Specify the number of cores to dedicate for the compute processes.
The maximum available cores
compute-memory
Specify the total memory to allocate for the compute processes.
Format: value and unit without a space.
Examples: 1024B, 10GiB, 5TiB.
The maximum available memory
core-ids
Specify the CPUs to allocate for the WEKA processes. Format: space-separated numbers.
drive-core-ids
Specify the CPUs to allocate for the drive processes. Format: space-separated numbers.
drive-dedicated-cores
Specify the number of cores to dedicate for the drive processes.
1 core per each detected drive
drives
Specify the drives to use.
This option overrides automatic detection. Format: space-separated strings.
All unmounted NVME devices
frontend-core-ids
Specify the CPUs to allocate for the frontend processes. Format: space-separated numbers.
-
frontend-dedicated-cores
Specify the number of cores to dedicate for the frontend processes.
1
max-cores-per-container
Override the default maximum number of cores per container for IO processes (19). If provided, the new value must be lower.
19
minimal-memory
Set each container's hugepages memory to 1.4 GiB * number of IO processes on the container.
net*
Specify the network devices to use. Format: space-separated strings.
no-rdma
Don't take RDMA support into account when computing memory requirements.
False
num-cores
Override the auto-deduction of the number of cores.
All available cores
path
Specify the path to write the resource files.
'.'
spare-cores
Specify the number of cores to leave for OS and non-WEKA processes.
1
spare-memory
Specify the memory to reserve for non-WEKA requirements.
Argument format: a value and unit without a space.
Examples: 10GiB, 1024B, 5TiB.
The maximum between 8 GiB and 2% of the total RAM
weka-hugepages-memory
Specify the memory to allocate for compute, frontend, and drive processes.
Argument format: a value and unit without a space.
Examples: 10GiB, 1024B, 5TiB.
The maximum available memory
3. Create drive containers
Command: weka local setup container
For each server in the cluster, create the drive containers using the resource generator output file drives0.json.
The drives JSON file includes all the required values for creating the drive containers. Only the path to the JSON resource file is required (before cluster creation, the optional parameter join-ips is not relevant).
Parameters
resources-path*
A valid path to the resource file.
4. Create a cluster
Command: weka cluster create
To create a cluster of the allocated containers, use the following command:
Parameters
hostnames*
Hostnames or IP addresses. If port 14000 is not the default for the drives, you can specify hostnames:port or ips:port. Minimum cluster size: 6 Format: space-separated strings
host-ips
IP addresses of the management interfaces. Use a list of ip+ip addresses pairs of two cards for HA configuration. In case the cluster is connected to both IB and Ethernet, it is possible to set up to 4 management IPs for redundancy of both the IB and Ethernet networks using a list of ip+ip+ip+ip addresses.
The same number of values as in hostnames.
Format: comma-separated IP addresses.
IP of the first network device of the container
Notes:
It is possible to use a hostname or an IP address. This string serves as the container's identifier in subsequent commands.
If a hostname is used, ensure the hostname to IP resolution mechanism is reliable.
Once the cluster creation is successfully completed, the cluster is in the initialization phase, and some commands can only run in this phase.
To configure high availability (HA), at least two cards must be defined for each container.
On successful completion of the formation of the cluster, every container receives a container-ID. To display the list of the containers and IDs, run
weka cluster container.In IB installations the
--containers-ipsparameter must specify the IP addresses of the IPoIB interfaces.
5. Configure the SSD drives
Command: weka cluster drive add
To configure the SSD drives on each server in the cluster, or add multiple drive paths, use the following command:
Parameters
container-id*
The Identifier of the drive container to add the local SSD drives.
device-paths*
List of block devices that identify local SSDs.
It must be a valid Unix network device name.
Format: Space-separated strings.
Example, /dev/nvme0n1 /dev/nvme1n1
6. Create compute containers
Command: weka local setup container
For each server in the cluster, create the compute containers using the resource generator output file compute0.json.
Parameters
resources-path*
A valid path to the resource file.
join-ips
IP:port pairs for the management processes to join the cluster. In the absence of a specified port, the command defaults to using the standard WEKA port 14000. Set the values, only if you want to customize the port.
To restrict the client’s operations to only the essential APIs for mounting and unmounting operations, connect to WEKA clusters through TCP base port + 3 (for example, 14003).
The IP:port value must match the value used to create the container.
Format: comma-separated IP addresses.
Example: --join-ips 10.10.10.1,10.10.10.2,10.10.10.3:15000
7. Create frontend containers
Command: weka local setup container
For each server in the cluster, create the frontend containers using the resource generator output file frontend0.json.
Command example for installing a stateful client with restricted privileges
Parameters
resources-path*
A valid path to the resource file.
join-ips
IP:port pairs for the management processes to join the cluster. In the absence of a specified port, the command defaults to using the standard WEKA port 14000. Set the values, only if you want to customize the port.
Format: comma-separated IP addresses.
Example: --join-ips 10.10.10.1,10.10.10.2,10.10.10.3:15000
client
Set the container as a client.
restricted
Set a client container with restricted privileges as a regular user regardless of the logged-in role.
8. Name the cluster
Command: weka cluster update --cluster-name=<cluster name>
What to do next?
Last updated