CLI reference guide
This CLI reference guide is generated from the output of running the weka command with the help option. It provides detailed descriptions of available commands, arguments, and options.
weka
The base command for all weka related CLIs
weka [--color color] [--help] [--build] [--version] [--legal]
--agent
Start the agent service
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
--build
Prints the CLI build number and exits
-v, --version
Prints the CLI version and exits
--legal
Prints software license information and exits
weka access-group
Commands that manage the cluster access-groups
weka access-group [--color color] [--help]
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka access-group status
Show the status of the access-groups
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka access-group enable
Enable access-groups
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka access-group disable
Disable access-groups
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka agent
Commands that control the weka agent (outside the weka containers)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka agent install-agent
Installs Weka agent on the machine the command is executed from
--agent-port
The port to listen on for incoming requests
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--no-update
Don't update the locally installed containers
--no-start
Do not register the weka-agent service and start it after its creation
-h, --help
Show help message
weka agent update-containers
Update the currently available containers and version specs to the current agent version. This command does not update weka, only the container's representation on the local machine.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka agent uninstall
Deletes all Weka files, drivers, shared memory and any other remainder from the machine this command is executed from. WARNING - This action is destructive and might cause a loss of data!
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--force
Force the action to actually happen
--ignore-wekafs-mounts
Proceed even with active wekafs mounts
--keep-files
Do not remove Weka version images and keep in installation directory
-h, --help
Show help message
weka agent autocomplete
Bash autocompletion utilities
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka agent autocomplete install
Locally install bash autocompletion utility
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka agent autocomplete uninstall
Locally uninstall bash autocompletion utility
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka agent autocomplete export
Export bash autocompletion script
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka alerts
List alerts in the Weka cluster
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: muted,type,count,title,description,action
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--muted
List muted alerts alongside the unmuted ones
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka alerts types
List all alert types that can be returned from the Weka cluster
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka alerts mute
Mute an alert-type. Muted alerts will not appear in the list of active alerts. It is required to specify a duration for the mute. Once the set duration concludes, the alert-type will automatically be unmuted.
alert-type*
An alert-type to mute, use weka alerts types to list types
duration*
How long to mute this alert type for (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka alerts unmute
Unmute an alert-type which was previously muted.
alert-type*
An alert-type to unmute, use weka alerts types to list types
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka alerts describe
Describe all the alert types that might be returned from the weka cluster (including explanations and how to handle them)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: type,title,action
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cloud
Cloud commands. List the cluster's cloud status, if no subcommand supplied.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka cloud status
Show cloud connectivity status
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: host,health
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cloud enable
Turn cloud features on
--cloud-url
The base url of the cloud service
--cloud-stats
Enable or disable uploading stats to the cloud (format: 'on' or 'off')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cloud disable
Turn cloud features off
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cloud proxy
Get or set the HTTP proxy used to connect to cloud services
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-s, --set
Set a new proxy setting
-h, --help
Show help message
-J, --json
Format output as JSON
-u, --unset
Remove the HTTP proxy setting
weka cloud update
Update cloud settings
bucket-name*
AWS bucket name
region*
AWS region
access-key-id*
AWS access key
secret-key*
AWS secret
--session-token
S3 session token
--bucket-prefix
S3 bucket prefix
--proxy
HTTP(S) proxy to connect to the cloud through
--bytes-per-second
Maximum uploaded bytes per second
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cloud upload-rate
Get the cloud upload rate
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka cloud upload-rate set
Set the cloud upload rate
--bytes-per-second
Maximum uploaded bytes per second
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster
Commands that manage the cluster
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka cluster create
Form a Weka cluster from hosts that just has Weka installed on them
host-hostnames...
A list of hostname to be included in the new cluster
--admin-password
The password for the cluster admin user; will be set to the default password if not provided
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--host-ips...
Management IP addresses; If empty, the hostnames will be resolved; If hosts are highly-available or mixed-networking, use IP set '++...+';
-h, --help
Show help message
-J, --json
Format output as JSON
weka cluster update
Update cluster configuration
--cluster-name
Cluster name
--data-drives
Number of RAID data drives
--parity-drives
Number of RAID protection parity drives
--scrubber-bytes-per-sec
Rate of RAID scrubbing in units per second (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster process
List the cluster processes
process-ids...
Only return these processes IDs.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
--container...
Only return the processes of these container IDs, if not specified the weka-processes for all the containers will be returned
--role...
Only return processes with these roles (format: 'management', 'frontend', 'compute', 'drives' or 'dataserv')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,containerId,hostname,container,ips,status,software,release,role,mode,netmode,cpuId,core,socket,numa,cpuModel,memory,uptime,fdName,fdId,traceHistory,fencingReason,joinRejectReason,failureText,failure,failureTime,failureCode
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--local
Get result from local weka host
-b, --backends
Only return backend containers
-c, --clients
Only return client containers
-l, --leadership
Only return containers that are part of the cluster leadership
-L, --leader
Only return the cluster leader
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster bucket
List the cluster buckets, logical compute units used to divide the workload in the cluster
bucket-ids...
Only return these bucket IDs.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: id,leader,term,lastActiveTerm,state,council,uptime,leaderVersionSig,electableMode,sourceMembers,nonSourceMembers,fillLevel
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster failure-domain
List the Weka cluster failure domains
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,fd,active_drives,failed_drives,total_drives,removed_drives,containers,total_containers,drive_proces,total_drive_proces,compute_proces,total_compute_proces,capacity
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--show-removed
Show drives that were removed from the cluster
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster hot-spare
Get or set the number of hot-spare failure-domains in the cluster. If param is not given, the current number of hot-spare FDs will be listed
count...
The number of failure-domains
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--skip-resource-validation
Skip verifying that the cluster has enough RAM and SSD resources allocated for the hot-spare
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster start-io
Start IO services
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster stop-io
Stop IO services
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--brutal-no-flush
Force stopping IO services immediately without graceful flushing of ongoing operations. Using this flag may cause data-loss if used without explicit guidance from WekaIO customer support.
--keep-external-containers
Keep external containers(S3, SMB, NFS) running
-f, --force
Force this action without further confirmation. This action will disrupt operation of all connected clients. To restore IO service run 'weka cluster start-io'.
-h, --help
Show help message
weka cluster drive
List the cluster's drives
uuids...
A list of drive IDs or UUIDs to list. If no ID is specified, all drives are listed.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
--container...
Only return the drives of these container IDs, if not specified, all drives are listed
-o, --output...
Specify which columns to output. May include any of the following: uid,id,uuid,host,hostname,node,path,size,status,stime,fdName,fdId,writable,used,nvkvused,attachment,vendor,firmware,serial,model,added,removed,block,remain,threshold,drive_status_message
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--show-removed
Show drives that were removed from the cluster
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster drive scan
Scan for provisioned drives on the cluster's containers
container-ids...
A list of container ids to scan for drives
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster drive activate
Activate the supplied drive, or all drives (if none supplied)
uuids...
A list of drive IDs or UUIDs to activate. If no ID is supplied, all inactive drives will be activated.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster drive deactivate
Deactivate the supplied drive(s)
uuids...
A list of drive IDs or UUIDs to deactivate.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--skip-resource-validation
Skip verifying that the configured hot spare capacity will remain available after deactivating the drives
-f, --force
Force this action without further confirmation. This action may impact performance while the drive is phasing out.
-h, --help
Show help message
weka cluster drive add
Add the given drive
container-id*
The container the drive attached to (given by ids)
device-paths...
Device paths of the drives to add
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: path,uuid
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--force
Force formatting the drive for weka, avoiding all safety checks!
--allow-format-non-wekafs-drives
Allow reuse of drives formatted by another versions
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster drive remove
Remove the supplied drive(s)
uuids...
A list of drive UUIDs to remove. A UUID is a hex string formatted as 8-4-4-4-12 e.g. 'abcdef12-1234-abcd-1234-1234567890ab'
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. To undo the removal, add the drive back and re-scan the drives on the host local to the drive.
-h, --help
Show help message
weka cluster mount-defaults
Commands for editing default mount options
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka cluster mount-defaults set
Set default mount options.
--qos-max-throughput
qos-max-throughput is the maximum throughput allowed for the client for either receive or transmit traffic.
--qos-preferred-throughput
qos-preferred-throughput is the throughput that gets preferred state (NORMAL instead of LOW) in QoS.
--qos-max-ops
qos-max-ops is the maximum number of operations of any kind for the client
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster mount-defaults show
View default mount options
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-J, --json
Format output as JSON
-h, --help
Show help message
weka cluster mount-defaults reset
Reset default mount options
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--qos-max-throughput
qos-max-throughput is the maximum throughput allowed for the client for either receive or transmit traffic.
--qos-preferred-throughput
qos-preferred-throughput is the throughput that gets preferred state (NORMAL instead of LOW) in QoS.
--qos-max-ops
qos-max-ops is the maximum number of operations of any kind for the client
-h, --help
Show help message
weka cluster servers
Commands for physical servers
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka cluster servers list
List the cluster servers
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
--role...
Only list machines with specified roles. Possible roles: (format: 'backend', 'client', 'nfs', 'smb' or 's3')
-o, --output...
Specify which columns to output. May include any of the following: hostname,uid,ip,roles,status,up_since,cores,memory,drives,nodes,load,versions,architecture
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster servers show
Show a single server overview according to given server uid
uid*
The Server UID
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-J, --json
Format output as JSON
-h, --help
Show help message
weka cluster container
List the cluster containers
container-ids...
Only return these container IDs.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,hostname,container,machineIdentifier,ips,status,RequestedAction,software,release,mode,fd,fdName,fdType,fdId,cores,feCores,driveCores,coreIds,memory,bw,scrubberLimit,dedicated,autoRemove,leadership,uptime,failureText,failure,failureTime,failureCode,requestedActionFailureText,requestedActionFailure,requestedActionFailureTime,requestedActionFailureCode,added,cloudProvider,availabilityZone,instanceType,instanceId,kernelName,kernelRelease,kernelVersion,platform
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--local
Get result from local weka host
-b, --backends
Only return backend containers
-c, --clients
Only return client containers
-l, --leadership
Only return containers that are part of the cluster leadership
-L, --leader
Only return the cluster leader
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster container info-hw
Show hardware information about one or more containers
hostnames...
A list of containers to query (by hostnames or IPs). If no container is supplied, all of the cluster containers will be queried
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--info-type...
Specify what information to query: version
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster container failure-domain
Set the container failure-domain
container-id*
Container ID as shown in weka cluster container
--name
Add this container to a named failure-domain. A failure-domain will be created if it doesn't exist yet.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--auto
Set this container to be a failure-domain of its own
-h, --help
Show help message
weka cluster container dedicate
Set the container as dedicated to weka. For example it can be rebooted whenever needed, and configured by weka for optimal performance and stability
container-id*
Container ID as shown in weka cluster container
on*
Set the container as weka dedicated, off unsets container as weka dedicated (format: 'on' or 'off')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container bandwidth
Limit weka's bandwidth for the container
container-id*
Container ID as shown in weka cluster container
bandwidth*
New bandwidth limitation per second (format: either "unlimited" or bandwidth per second in binary or decimal values: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container cores
Dedicate container's cores to weka
container-id*
Container ID as shown in weka cluster container
cores*
Number of CPU cores dedicated to weka - If set to 0 - no drive could be added to this container
--frontend-dedicated-cores
Number of cores dedicated to weka frontend (out of the total )
--drives-dedicated-cores
Number of cores dedicated to weka drives (out of the total )
--compute-dedicated-cores
Number of cores dedicated to weka compute (out of the total )
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--core-ids...
Specify the ids of weka dedicated cores.
--no-frontends
Do not create any processes with a frontend role
--only-drives-cores
Create only processes with a drives role
--only-compute-cores
Create only processes with a compute role
--only-frontend-cores
Create only processes with a frontend role
--allow-mix-setting
Allow specified core-ids even if there are running containers with AUTO core-ids allocation on the same server.
-h, --help
Show help message
weka cluster container memory
Dedicate a set amount of RAM to weka
container-id*
Container ID as shown in weka cluster container
memory*
Memory dedicated to weka in bytes, set to 0 to let the system decide (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container auto-remove-timeout
Set how long to wait before removing this container if it disconnects from the cluster (for clients only)
container-id*
Container ID as shown in weka cluster container
auto-remove-timeout*
Minimum value is 60, use 0 to disable automatic removal
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container management-ips
Set the container's management process IPs. Setting 2 IPs will turn this containers networking into highly-available mode
container-id*
Container ID as shown in weka cluster container
management-ips...
New IPs for the management processes
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container resources
Get the resources of the supplied container
container-id*
Container ID as shown in weka cluster container
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--stable
List the resources from the last successfull container boot
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster container restore
Restore staged resources of the supplied containers, or all containers, to their stable state
container-ids...
A list of container ids for which to apply resources config
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--all
Apply resources on all the containers in the cluster. This will cause all backend containers in the entire cluter to restart simultaneously!
-h, --help
Show help message
weka cluster container apply
Apply the staged resources of the supplied containers, or all containers
container-ids...
A list of container ids for which to apply resources config
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--skip-resource-validation
Skip verifying that the cluster will still have enough RAM and SSD resources after deactivating the containers
--all
Apply resources on all the containers in the cluster. This will cause all backend containers in the entire cluter to restart simultaneously!
-f, --force
Force this action without further confirmation. This action will restart the containers on the containers and cannot be undone.
-h, --help
Show help message
weka cluster container activate
Activate the supplied containers, or all containers (if none supplied)
container-ids...
A list of container ids to activate
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--no-wait
--skip-resource-validation
Skip verifying that the cluster will still have enough RAM and SSD resources after deactivating the containers
--skip-activate-drives
Do not activate the drives of the container
-h, --help
Show help message
weka cluster container deactivate
Deactivate the supplied container(s)
container-ids...
A list of container ids to deactivate
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--no-wait
--skip-resource-validation
Skip verifying that the cluster will still have enough RAM and SSD resources after deactivating the containers
--allow-unavailable
Allow the container to be unavailable while it is deactivated which skips setting its local resources
-h, --help
Show help message
weka cluster container requested-action
Set the requested action of the supplied containers to one of: STOP, RESTART, APPLY_RESOURCES to gracefully stop, restart or apply resources to the containers.
requested_action*
The requested action to set the containers to (format: 'none', 'stop', 'restart' or 'apply_resources')
container-ids...
A list of container ids for which to set flow
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container clear-failure
Clear the last failure fields for all supplied containers
container-ids...
A list of container ids for which to clear the last failure
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster container add
Add a container to the cluster
hostname*
Management network hostname
--ip
Management IP; If empty, the hostname is resolved; If container is highly-available or mixed-networking, use IP set '++...+';
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--no-wait
Skip waiting for the container to be added to the cluster
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster container remove
Remove a container from the cluster
container-id*
The container ID of the container to be removed
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--no-wait
Don't wait for the container removal to complete, return immediately
--no-unimprint
Don't remotely unimprint the container, just remove it from the cluster configuration
-h, --help
Show help message
weka cluster container factory-reset
Factory resets the containers. NOTE! This can't be undone!
guid*
The cluster GUID
container-names-or-ips...
A list of containers (given by container-name or IP)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
When set, broute force reset
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster container net
List Weka dedicated networking devices in a container
container-ids...
Container IDs to get the network devices of
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,name,id,host,hostname,device,ips,netmask,gateway,cores,owner,vlan,netlabel
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster container net add
Allocate a dedicated networking device on a container (to the cluster).
container-id*
The container's id
device*
Network device pci-slot/mac-address/interface-name(s)
--ips-type
IPs type: POOL: IPs from the default data networking IP pool would be used, USER: configured by the user (format: 'pool' or 'user')
--gateway
Default gateway IP. In AWS this value is auto-detected, otherwise the default data networking gateway will be used.
--netmask
Netmask in bits number. In AWS this value is auto-detected, otherwise the default data networking netmask will be used.
--name
If empty, a name will be auto generated.
--label
The name of the switch or network group to which this network device is attached
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--ips...
IPs to be allocated to cores using the device. If not given - IPs may be set automatically according the interface's IPs, or taken from the default networking IPs pool
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster container net remove
Undedicate a networking device in a container.
container-id*
The container's id
name*
Net device name, e.g. container0net0
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster default-net
List the default data networking configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster default-net set
Set the default data networking configuration
--range
IP range
--gateway
Default gateway IP
--netmask-bits
Subnet mask bits (0..32)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster default-net update
Update the default data networking configuration
--range
IP range
--gateway
Default gateway IP
--netmask-bits
Subnet mask bits (0..32)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster default-net reset
Reset the default data networking configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster license
Get information about the current license status, how much resources are being used in the cluster and whether or not your current license is valid.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka cluster license payg
Enable pay-as-you-go for the cluster
plan-id*
Plan ID connected to a payment method
secret-key*
Secret key of the payment plan
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster license reset
Removes existing license information, returning the cluster to an unlicensed mode
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster license set
Set the cluster license
license*
The new license to set to the system
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster task
List the currently running background tasks and their status
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,type,state,phase,progress,paused,desc,time
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka cluster task pause
Pause a currently running background task
task-id*
Id of the task to pause
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster task resume
Resume a currently paused background task
task-id*
Id of the task to resume
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster task abort
Abort a currently running background task
task-id*
Id of the task to abort
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster task limits
List the current limits for background tasks
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka cluster task limits set
Set the limits for background tasks
--cpu-limit
Percent of the CPU resources to dedicate to background tasks
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster client-target-version
Commands that manage the clients target version
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka cluster client-target-version show
Show clients target version to be used in case of upgrade or a new mount (stateless client).
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster client-target-version set
Determine clients target version to be used in case of upgrade or a new mount (stateless client).
version-name*
The version to set
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka cluster client-target-version reset
Clear cluster's client target version value
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka diags
Diagnostics commands to help understand the status of the cluster and its environment
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka diags collect
Collect diags from all cluster hosts to a directory on the host running this command
-i, --id
Optional ID for this dump, if not specified a random ID is generated
-m, --timeout
How long to wait when downloading diags from all hosts. Default is 10 minutes, 0 means indefinite (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-d, --output-dir
Directory to save the diags dump to, default: /opt/weka/diags
-c, --core-limit
Limit to processing this number of core dumps, if found (default: 1)
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--container-id...
Container IDs to collect diags from, can be used multiple times. This flag causes --clients to be ignored.
--clients
Collect diags from client hosts only (by default diags are only collected from backends)
--backends
Collect diags from backend hosts (to be used in combination with --clients to collect from all hosts)
-t, --tar
Create a TAR of all collected diags
-v, --verbose
Print results of all diags, including successful ones
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
-J, --json
Format output as JSON
weka diags list
Prints results of a previously collected diags report
id...
ID of the dump to show or a path to the diags dump. If not specified a list of all collected diags is shown.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-v, --verbose
Print results of all diags, including successful ones
-h, --help
Show help message
weka diags rm
Stop a running instance of diags, and cancel its uploads.
id...
ID of the diags to cancel. Must be specified unless the all option is set.
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--all
Delete all.
-h, --help
Show help message
weka diags upload
Collect and upload diags from all cluster hosts to Weka's support cloud
-m, --timeout
How long to wait for diags to upload. Default is 10 minutes, 0 means indefinite (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-c, --core-limit
Limit to processing this number of core dumps, if found (default: 1)
--dump-id
ID of an existing dump to upload. This dump ID has to exist on this local server. If an ID is not specified, a new dump is created.
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--container-id...
Container IDs to collect diags from, can be used multiple times. This flag causes --clients to be ignored.
--clients
Collect diags from client hosts only (by default diags are only collected from backends)
--backends
Collect diags from backend hosts (to be used in combination with --clients to collect from all hosts)
-h, --help
Show help message
-J, --json
Format output as JSON
weka events
List all events that conform to the filter criteria
-n, --num-results
Get up to this number of events, default: 50
--start-time
Include events occurred in this time point and later (format: 5m, -5m, -1d, -1w, 1:00, 01:00, 18:30, 18:30:07, 2018-12-31 10:00, 2018/12/31 10:00, 2018-12-31T10:00, 2019-Nov-17 11:11:00.309, 9:15Z, 10:00+2:00)
--end-time
Include events occurred not later then this time point (format: 5m, -5m, -1d, -1w, 1:00, 01:00, 18:30, 18:30:07, 2018-12-31 10:00, 2018/12/31 10:00, 2018-12-31T10:00, 2019-Nov-17 11:11:00.309, 9:15Z, 10:00+2:00)
--severity
Include event with equal and higher severity, default: INFO (format: 'debug', 'info', 'warning', 'minor', 'major' or 'critical')
-d, --direction
Fetch events from the first available event (forward) or the latest created event (backward), default: backward (format: 'forward' or 'backward')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-t, --type-list...
Filter events by type, can be used multiple times (use 'weka events list-types' to see available types)
-x, --exclude-type-list...
Remove events by type, can be used multiple times (use 'weka events list-types' to see available types)
-c, --category-list...
Include only events matches to the category_list. Category can be Events, Node, Raid, Drive, ObjectStorage, System, Resources, Clustering, Network, Filesystem, Upgrade, NFS, Config, Cloud, InterfaceGroup, Org, User, Alerts, Licensing, Custom, Kms, Smb, Telemetry, Traces, S3, Security, Agent or KDriver
-o, --output...
Specify which columns to output. May include any of the following: time,cloudTime,node,category,severity,type,entity,desc
-i, --show-internal
Show internal events
-l, --cloud-time
Sort by cloud time instead of local timestamp
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka events list-local
List recent events that happened on the machine running this command
--start-time
Include events occurred in this time point and later (format: 5m, -5m, -1d, -1w, 1:00, 01:00, 18:30, 18:30:07, 2018-12-31 10:00, 2018/12/31 10:00, 2018-12-31T10:00, 2019-Nov-17 11:11:00.309, 9:15Z, 10:00+2:00)
--end-time
Include events occurred not later then this time point (format: 5m, -5m, -1d, -1w, 1:00, 01:00, 18:30, 18:30:07, 2018-12-31 10:00, 2018/12/31 10:00, 2018-12-31T10:00, 2019-Nov-17 11:11:00.309, 9:15Z, 10:00+2:00)
--next
Token for the next page of events
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: time,category,severity,permission,type,entity,node,hash
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--stem-mode
List stem mode events
--show-internal
Show internal events
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka events list-types
Show the event type definition information
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-c, --category...
List only the events that fall under one of the following categories: Events, Node, Raid, Drive, ObjectStorage, System, Resources, Clustering, Network, Filesystem, Upgrade, NFS, Config, Cloud, InterfaceGroup, Org, User, Alerts, Licensing, Custom, Kms, Smb, Telemetry, Traces, S3, Security, Agent or KDriver
-t, --type...
List only events of the specified types
-o, --output...
Specify which columns to output. May include any of the following: type,category,severity,description,format,permission,parameters,dedup,dedupParams
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--show-internal
Show internal events
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka events trigger-event
Trigger a custom event with a user defined parameter
message*
User defined text to trigger as the events parameter
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs
List filesystems defined in this Weka cluster
--name
Filesystem name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,name,group,usedSSD,usedSSDD,usedSSDM,freeSSD,availableSSDM,availableSSD,usedTotal,usedTotalD,freeTotal,availableTotal,maxFiles,status,encrypted,stores,auth,thinProvisioned,thinProvisioningMinSSDBudget,thinProvisioningMaxSSDBudget,usedSSDWD,usedSSDRD,reductionFactor,pendingReduction,dataReduction,reducedProcessedSize,reducedSize
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--capacities
Display all capacity columns
--force-fresh
Refresh the capacities to make sure they are most updated
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs create
Create a filesystem
name*
Filesystem name
group-name*
Group name
total-capacity*
Total capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--obs-name
Object Store bucket name. Mandatory for tiered filesystems
--ssd-capacity
SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--thin-provision-min-ssd
Thin provisioned minimum SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--thin-provision-max-ssd
Thin provisioned maximum SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--auth-required
Require the mounting user to be authenticated for mounting this filesystem. This flag is only effective in the root organization, users in non-root organizations must be authenticated to perform a mount operation. (format: 'yes' or 'no')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--encrypted
Creates an encrypted filesystem
--allow-no-kms
Allow (insecurely) creating an encrypted filesystem without a KMS configured
--data-reduction
Enable data reduction
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs download
Download a filesystem from object store
name*
Filesystem name
group-name*
Group name
total-capacity*
Total capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
ssd-capacity*
SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
obs-bucket*
Object Store bucket
locator*
Locator
--auth-required
Require the mounting user to be authenticated for mounting this filesystem. This flag is only effective in the root organization, users in non-root organizations must be authenticated to perform a mount operation. (format: 'yes' or 'no')
--additional-obs-bucket
Additional Object Store bucket
--snapshot-name
Downloaded snapshot name (default: uploaded name)
--access-point
Downloaded snapshot access point (default: uploaded access-point)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--skip-resource-validation
Skip verifying that the cluster has enough RAM and SSD resources allocated for the downloaded filesystem
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs update
Update a filesystem
name*
Filesystem name
--new-name
New name
--total-capacity
Total capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--ssd-capacity
SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--thin-provision-min-ssd
Thin provision minimum SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--thin-provision-max-ssd
Thin provision maximum SSD capacity (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--data-reduction
Enable data reduction
--auth-required
Require the mounting user to be authenticated for mounting this filesystem. This flag is only effective in the root organization, users in non-root organizations must be authenticated to perform a mount operation. (format: 'yes' or 'no')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs delete
Delete a filesystem
name*
Filesystem name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--purge-from-obs
Delete filesystem's objects from the local writable Object Store, making all locally uploaded snapshots unusable
-f, --force
Force this action without further confirmation. This action DELETES ALL DATA in the filesystem and cannot be undone.
-h, --help
Show help message
weka fs restore
Restore filesystem content from a snapshot
file-system*
The name of the Filesystem to be restored
source-name*
The name of the source snapshot
--preserved-overwritten-snapshot-name
Name of a snapshot to create with the old content of the filesystem
--preserved-overwritten-snapshot-access-point
Access point of the preserved overwritten snapshot
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action replaces all data in the filesystem with the content of the snapshot and cannot be undone.
-h, --help
Show help message
-J, --json
Format output as JSON
weka fs quota
Commands used to control directory quotas
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka fs quota set
Set a directory quota in a filesystem
path*
Path in the filesystem
--soft
Soft limit for the directory, or 0 for unlimited (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--hard
Hard limit for the directory, or 0 for unlimited (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--grace
Soft limit grace period (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--owner
Quota owner (e.g., email)
--file-system
Filesystem name
--snap-name
Name of the writable snapshot
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka fs quota set-default
Set a default directory quota in a filesystem
path*
Path in the filesystem
--soft
Soft limit for the directory (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--hard
Hard limit for the directory (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--grace
Soft limit grace period (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--owner
Quota owner (e.g., email)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs quota unset
Unsets a directory quota in a filesystem
path*
Path in the filesystem
--generation
Remove a specific generation of quota
--file-system
Filesystem name
--snap-name
Name of the writable snapshot
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka fs quota unset-default
Unsets a default directory quota in a filesystem
path*
Path in the filesystem
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs quota list
List filesystem quotas (by default, only exceeding ones)
fs-name
Filesystem name
--snap-name
Optional snapshot name
-p, --path
Show this path only
-u, --under
List under (and including) this path only
--over
Show only quotas over this percentage of usage (format: 0..100)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: quotaId,path,used,dblk,mblk,soft,hard,usage,owner,grace_seconds,time_over_soft_limit,status
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--all
Show all (not only exceeding) quotas
-q, --quick
Skip resolving inodes to paths
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs quota list-default
List filesystem default quotas
fs-name
Filesystem name
--snap-name
Optional snapshot name
-p, --path
Show this path only
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: inodeId,path,soft,hard,owner,grace
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs group
List filesystem groups
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,group,name,retention,demote
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs group create
Create a filesystem group
name*
The filesystem group name to be created
--target-ssd-retention
Period of time to keep an SSD copy of the data (format: 3s, 2h, 4m, 1d, 1d5h, 1w)
--start-demote
Period of time to wait before copying data to the Object Store (format: 3s, 2h, 4m, 1d, 1d5h, 1w)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs group update
Update a filesystem group
name*
The filesystem group name to be created
--new-name
Updated name of the specified filesystem group
--target-ssd-retention
Period of time to keep an SSD copy of the data (format: 3s, 2h, 4m, 1d, 1d5h, 1w)
--start-demote
Period of time to wait before copying data to the Object Store (format: 3s, 2h, 4m, 1d, 1d5h, 1w)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs group delete
Delete a filesystem group
name*
The name of the filesystem group to be deleted
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs snapshot
List snapshots
--file-system
Filesystem name
--name
Snapshot name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,filesystem,name,access,writeable,created,local_upload_size,remote_upload_size,local_object_status,local_object_progress,local_object_locator,remote_object_status,remote_object_progress,remote_object_locator,removing,prefetched
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs snapshot create
Create a snapshot
file-system*
Source Filesystem name
name*
Target Snapshot name
--access-point
Access point
--source-snapshot
Source snapshot
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: id,name,access,writeable,created
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--is-writable
Writable
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs snapshot copy
Copy one snapshot over another
file-system*
Source Filesystem name
source-name*
Source snapshot name
destination-name*
Destination snapshot name
--preserved-overwritten-snapshot-name
Name of a snapshot to create with the old content of the destination
--preserved-overwritten-snapshot-access-point
Access point of the preserved overwritten snapshot
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs snapshot update
Update snapshot parameters
file-system*
Source Filesystem name
name*
Snapshot name
--new-name
Updated snapshot name
--access-point
Access point
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs snapshot access-point-naming-convention
Access point naming convention
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka fs snapshot access-point-naming-convention status
Show access point naming convention
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs snapshot access-point-naming-convention update
Update access point naming convention
access-point-naming-convention*
access point naming configuration (format: 'date' or 'name')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs snapshot upload
Upload a snapshot to object store
file-system*
Filesystem name
snapshot*
Snapshot name
--site
The site of the Object Store to upload to (format: 'local' or 'remote')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--allow-non-chronological
Allow uploading snapshots to remote object-store in non-chronological order. This is not recommended, as it will incur high data overhead.
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs snapshot download
Download a snapshot into an existing filesystem
file-system*
Filesystem name
locator*
Locator
--name
Snapshot name (default: uploaded name)
--access-point
Access point (default: uploaded access point)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--allow-non-chronological
Allow downloading snapshots in non-chronological order. This is not recommended, as it will incur high data overhead.
--allow-divergence
Allow downloading snapshots which are not descendants of the last downloaded snapshot.
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs snapshot delete
Delete a snapshot
file-system*
Source Filesystem name
name*
Snapshot name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action deletes all data stored by the snapshot and cannot be undone.
-h, --help
Show help message
weka fs tier
Show object store connectivity for each node in the cluster
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: obsBucket,statusUpload,statusDownload,statusRemove,nodesDown,errors
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier location
Show data storage location for a given path
path*
Path to get information about
paths...
Extra paths to get information about
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: path,type,size,ssdWrite,ssdRead,obsBytes,remoteBytes
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier fetch
Fetch object-stored files to SSD storage
path...
A file path to fetch to SSD storage. Multiple paths can be passed, e.g. `find ...
--non-existing
Behavior for non-existing files (default: error) (format: 'error', 'warn' or 'ignore')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-v, --verbose
Verbose output, showing fetch requests as they are submitted
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs tier release
Release object-stored files from SSD storage
path...
A file path to release from SSD storage. Multiple paths can be passed, e.g. `find ...
--non-existing
Behavior for non-existing files (default: error) (format: 'error', 'warn' or 'ignore')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-v, --verbose
Verbose output, showing release requests as they are submitted
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs tier capacity
List capacities for object store buckets attached to filesystems
--filesystem
Filesystem name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: fsUid,fsName,bucketUid,bucketName,totalConsumedCapacity,UsedCapacity,reclaimable,reclaimableThreshold,reclaimableLowThreshold,reclaimableHighThreshold
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
--force-fresh
Refresh the capacities to make sure they are most updated
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier s3
List S3 object store buckets configuration and status
--obs-name
Name of the Object Store
--name
Name of the Object Store bucket
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,obsId,obsName,id,name,site,statusUpload,statusDownload,statusRemove,nodesUpForUpload,nodesUpForDownload,nodesUpForRemove,nodesDownForUpload,nodesDownForDownload,nodesDownForRemove,nodesUnknownForUpload,nodesUnknownForDownload,nodesUnknownForRemove,errors,protocol,hostname,port,bucket,auth,region,access,secret,status,up,downloadBandwidth,uploadBandwidth,removeBandwidth,errorsTimeout,prefetch,downloads,uploads,removals,maxUploadExtents,maxUploadSize,enableUploadTags,stsOperationType,stsRoleArn,stsRoleSessionName,stsDuration
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier s3 add
Create a new S3 object store bucket connection
name*
Name of the Object Store bucket
--site
The site of the Object Store, default: local (format: 'local' or 'remote')
--obs-name
Name of the Object Store to associate this new bucket to
--hostname
Hostname (or IP) of the entrypoint to the storage
--port
Port of the entrypoint to S3 (single Accesser or Load-Balancer)
--bucket
Name of the bucket we are assigned to work with
--auth-method
Authentication method. S3AuthMethod can be None, AWSSignature2 or AWSSignature4
--region
Name of the region we are assigned to work with (usually empty)
--access-key-id
Access Key ID for AWS Signature authentications
--secret-key
Secret Key for AWS Signature authentications
--protocol
One of: HTTP (default), HTTPS, HTTPS_UNVERIFIED
--obs-type
One of: AWS (default), AZURE
--bandwidth
Bandwidth limitation per core (Mbps) (format: 1..4294967295)
--download-bandwidth
Download bandwidth limitation per core (Mbps) (format: 1..4294967295)
--upload-bandwidth
Upload bandwidth limitation per core (Mbps) (format: 1..4294967295)
--remove-bandwidth
Remove bandwidth limitation per core (Mbps) (format: 1..4294967295)
--errors-timeout
If the Object Store bucket link is down for longer than this, all IOs that need data return with an error (format: duration between 1 minute and 15 minutes)
--prefetch-mib
How many MiB of data to prefetch when reading a whole MiB on object store. Default Value is 128MiB (format: 0..600)
--max-concurrent-downloads
Maximum number of downloads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-uploads
Maximum number of uploads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-removals
Maximum number of removals we concurrently perform on this object store in a single IO node (format: 1..64)
--max-extents-in-data-blob
Maximum number of extents' data to upload to an object store data blob
--max-data-blob-size
Maximum size to upload to an object store data blob (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--enable-upload-tags
Enable tagging of uploaded objects
--sts-operation-type
AWS STS operation type to use. Default: none (format: 'assume_role' or 'none')
--sts-role-arn
The Amazon Resource Name (ARN) of the role to assume. Mandatory when setting sts-operation to ASSUME_ROLE
--sts-role-session-name
An identifier for the assumed role session. Length constraints: Minimum length of 2, maximum length of 64.
owed characters: upper and lo
wer-case alphanumeric characters with no spaces.
weka fs tier s3 update
Edit an existing S3 object store bucket connection
name*
Name of the Object Store bucket
--new-name
New name
--new-obs-name
New Object Store name
--hostname
Hostname (or IP) of the entrypoint to the storage
--port
Port of the entrypoint to S3 (single Accesser or Load-Balancer)
--protocol
One of: HTTP (default), HTTPS, HTTPS_UNVERIFIED
--bucket
Name of the bucket we are assigned to work with
--auth-method
Authentication method. S3AuthMethod can be None, AWSSignature2 or AWSSignature4
--region
Name of the region we are assigned to work with (usually empty)
--access-key-id
Access Key ID for AWS Signature authentications
--secret-key
Secret Key for AWS Signature authentications
--bandwidth
Bandwidth limitation per core (Mbps) (format: 1..4294967295)
--download-bandwidth
Download bandwidth limitation per core (Mbps) (format: 1..4294967295)
--upload-bandwidth
Upload bandwidth limitation per core (Mbps) (format: 1..4294967295)
--remove-bandwidth
Remove bandwidth limitation per core (Mbps) (format: 1..4294967295)
--prefetch-mib
How many MiB of data to prefetch when reading a whole MiB on object store. Default Value is 128MiB (format: 0..600)
--errors-timeout
If the Object Store bucket link is down for longer than this, all IOs that need data return with an error (format: duration between 1 minute and 15 minutes)
--max-concurrent-downloads
Maximum number of downloads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-uploads
Maximum number of uploads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-removals
Maximum number of removals we concurrently perform on this object store in a single IO node (format: 1..64)
--max-extents-in-data-blob
Maximum number of extents' data to upload to an object store data blob
--max-data-blob-size
Maximum size to upload to an object store data blob (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--enable-upload-tags
Enable tagging of uploaded objects
--sts-operation-type
AWS STS operation type to use. Default: none (format: 'assume_role' or 'none')
--sts-role-arn
The Amazon Resource Name (ARN) of the role to assume. Mandatory when setting sts-operation to ASSUME_ROLE
--sts-role-session-name
An identifier for the assumed role session. Length constraints: Minimum length of 2, maximum length of 64.
owed characters: upper and lo
wer-case alphanumeric characters with no spaces.
weka fs tier s3 delete
Delete an existing S3 object store connection
name*
Name of the Object Store bucket
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka fs tier s3 attach
Attach a filesystem to an existing Object Store
fs-name*
Name of the Filesystem
obs-name*
Name of the Object Store bucket to attach
--mode
The operation mode for the Object Store bucket (format: 'writable' or 'remote')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs tier s3 detach
Detach a filesystem from an attached object store
fs-name*
Name of the Filesystem
obs-name*
Name of the Object Store bucket to detach
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-f, --force
Force this action without further confirmation. This process might take a while to complete and it cannot be aborted. The data will remain intact on the object store, and you can still use the uploaded snapshots for recovery.
weka fs tier s3 snapshot
Commands used to display info about uploaded snapshots
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
####### weka fs tier s3 snapshot list
List and show info about snapshots uploaded to Object Storage
name*
Name of the Object Store bucket
--locator
Locator
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: guid,fsId,snapId,origFsId,fsName,snapName,accessPoint,totalMetaData,totalSize,ssdCapacity,totalCapacity,maxFiles,numGuids,compatibleVersion
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier ops
List all the operations currently running on an object store from all the hosts in the cluster
name
Name of the Object Store bucket
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: node,obsBucket,key,type,execution,phase,previous,start,size,results,errors,lastHTTP,concurrency,inode
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier obs
List object stores configuration and status
--name
Name of the Object Store
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,name,site,bucketsCount,uploadBucketsUp,downloadBucketsUp,removeBucketsUp,protocol,hostname,port,auth,region,access,secret,downloadBandwidth,uploadBandwidth,remove3Bandwidth,downloads,uploads,removals,maxUploadExtents,maxUploadSize,enableUploadTags,maxUploadRam,stsOperationType,stsRoleArn,stsRoleSessionName,stsDuration
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs tier obs update
Edit an existing object store
name*
Name of the Object Store
--new-name
New name
--hostname
Hostname (or IP) of the entrypoint to the bucket
--port
Port of the entrypoint to S3 (single Accesser or Load-Balancer)
--protocol
One of: HTTP (default), HTTPS, HTTPS_UNVERIFIED
--auth-method
Authentication method. S3AuthMethod can be None, AWSSignature2 or AWSSignature4
--region
Name of the region we are assigned to work with (usually empty)
--access-key-id
Access Key ID for AWS Signature authentications
--secret-key
Secret Key for AWS Signature authentications
--bandwidth
Bandwidth limitation per core (Mbps) (format: 1..4294967295)
--download-bandwidth
Download bandwidth limitation per core (Mbps) (format: 1..4294967295)
--upload-bandwidth
Upload bandwidth limitation per core (Mbps) (format: 1..4294967295)
--remove-bandwidth
Remove bandwidth limitation per core (Mbps) (format: 1..4294967295)
--max-concurrent-downloads
Maximum number of downloads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-uploads
Maximum number of uploads we concurrently perform on this object store in a single IO node (format: 1..64)
--max-concurrent-removals
Maximum number of removals we concurrently perform on this object store in a single IO node (format: 1..64)
--max-extents-in-data-blob
Maximum number of extents' data to upload to an object store data blob
--max-data-blob-size
Maximum size to upload to an object store data blob (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--upload-memory-limit
Maximum RAM to allocate for concurrent uploads to this object store (per node) (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--enable-upload-tags
Enable tagging of uploaded objects
--sts-operation-type
AWS STS operation type to use. Default: none (format: 'assume_role' or 'none')
--sts-role-arn
The Amazon Resource Name (ARN) of the role to assume. Mandatory when setting sts-operation to ASSUME_ROLE
--sts-role-session-name
An identifier for the assumed role session. Length constraints: Minimum length of 2, maximum length of 64.
owed characters: upper and lo
wer-case alphanumeric characters with no spaces.
weka fs reserve
Thin provisioning reserve for organizations
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka fs reserve status
Thin provisioning reserve for organizations
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: id,name,ssdReserve
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka fs reserve set
Set an organization's thin provisioning SSD reserve
ssd-capacity*
SSD capacity to reserve (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--org
Organization name or ID
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka fs reserve unset
Unset an organization's thin provisioning SSD's reserve
--org
Organization name or ID
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka dataservice
Commands that manage dataservice
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka dataservice global-config
Dataservice Global Configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka dataservice global-config set
Set Dataservice global configuration options
--config-fs
config filesystem name, use "" to invalidate
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka dataservice global-config show
Show the Dataservice global configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka interface-group
List interface groups
--name
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,name,mask,gateway,type,status,ips,ports,allowManageGids
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka interface-group assignment
List the currently assigned interface for each floating-IP address in the given interface-group. If is not supplied, assignments for all floating-IP addresses will be listed
--name
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: ip,host,port,group
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka interface-group add
Create an interface group
name*
Interface group name
type*
Group type
--subnet
subnet mask in the 255.255.0.0 format
--gateway
gateway ip
--allow-manage-gids
Allow to use manage-gids in exports. With manage-gids, the list of group ids received from the client will be replaced by a list of group ids determined by an appropriate lookup on the server (format: 'on' or 'off')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: name,mask,gateway,type,status,ips,ports,allowManageGids
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka interface-group update
Update an interface group
name*
Interface group name
--subnet
subnet mask in the 255.255.0.0 format
--gateway
gateway ip
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka interface-group delete
Delete an interface group
name*
Interface group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected clients and can be undone by re-creating the interface group.
-h, --help
Show help message
weka interface-group ip-range
Commands that manage interface-groups' ip-ranges
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka interface-group ip-range add
Add an ip range to an interface group
name*
Interface group name
ips*
IP range
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka interface-group ip-range delete
Delete an ip range from an interface group
name*
Interface group name
ips*
IP range
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected clients and can be undone by re-creating the IP range.
-h, --help
Show help message
weka interface-group port
Commands that manage interface-groups' ports
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka interface-group port add
Add a server port to an interface group
name*
Interface group name
server-id*
Server ID on which the port resides
port*
Port's device. (e.g. eth1)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka interface-group port delete
Delete a server port from an interface group
name*
Interface group name
server-id*
Server ID on which the port resides
port*
Port's device. (e.g. eth1)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected clients and can be undone by re-adding the port.
-h, --help
Show help message
weka local
Commands that control weka and its containers on the local machine
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local install-agent
Installs Weka agent on the machine the command is executed from
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--no-update
Don't update the locally installed containers
--no-start
Do not register the weka-agent service and start it after its creation
-h, --help
Show help message
weka local diags
Collect diagnostics from the local machine
-i, --id
A unique identifier for this dump
-d, --output-dir
Directory to save the diags dump to, default: /opt/weka/diags
-c, --core-dump-limit
Limit to processing this number of core dumps, if found (default: 1)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-s, --collect-cluster-info
Collect cluster-related information. Warning: Use this flag on one host at a time to avoid straining the cluster.
-t, --tar
Create a TAR of all collected diags
-v, --verbose
Print results of all diags, including successful ones
-h, --help
Show help message
weka local events
List the events saved to the local drive. This command does not require authentication and can be used when Weka is turned off.
--path
Path to where local events are stored
--container-name
Name of the container whose events will be collected (default default)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: time,uuid,category,severity,permission,type,entity,node,parameters,hash
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka local ps
List the Weka containers running on the machine this command is executed from
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: name,state,running,disabled,uptime,monitoring,persistent,port,pid,status,versionName,failureText,failure,failureTime,upgradeState
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka local rm
Delete a Weka container from the machine this command is executed from (this removed the data associated with the container, but retains the downloaded software)
containers...
The containers to remove
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--all
Remove all containers
-f, --force
Force this action without further confirmation. This would delete all data associated with the container(s) and can potentially lose all data in the cluster.
-h, --help
Show help message
weka local start
Start a Weka container
container...
The container to start
-w, --wait-time
How long to wait for the container to start (default: 15m) (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to start
-d, --start-and-enable-dependent
Start and enable dependent containers even if we state container by name
-h, --help
Show help message
weka local stop
Stop a Weka container
container...
The container to stop
--reason
The reason weka was stopped, will be presented to the user during 'weka status'
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to stop
-g, --graceful
Stop the container gracefully
-d, --stop-and-disable-dependent
Implictly stop and disable dependent containers even if we state container by name
-f, --force
Skip the check for active mounts
-h, --help
Show help message
weka local restart
Restart a Weka container
container...
The container to restart
-w, --wait-time
How long to wait for the container to start (default: 15m) (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to restart
-g, --graceful
Restart the container gracefully
--dont-restart-dependent-containers
Do not restart dependent containers
-h, --help
Show help message
weka local status
Show the status of a Weka container
container...
The container to display it's status
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to show
-v, --verbose
Verbose mode
-h, --help
Show help message
-J, --json
Format output as JSON
weka local enable
Enable monitoring for the requested containers so they automaticlly start on machine boot. This does not affect the current running status of the container. In order to change the current status, use the "weka local start/stop" commands. If no container names are specified, this command runs on all containers.
container...
The container to enable
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to enable
-h, --help
Show help message
weka local disable
Disable containers by not launching them on machine boot. This does not affect the current running status of the container. In order to change the current status, use the "weka local start/stop" commands. If no container names are specified, this command runs on all containers.
container...
The container to disable
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to disable
-h, --help
Show help message
weka local monitoring
Turn monitoring on/off for the given containers, or all containers if none are specified. When a container is started, it's always monitored. When a container is monitored, it will be restarted if it exits without being stopped through the CLI.
enabled*
Whether monitoring should be on or off (format: 'on' or 'off')
container...
The container to disable
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-t, --type...
The container types to disable
-h, --help
Show help message
weka local run
Execute a command inside a new container that has the same mounts as the given container. If no container is specified, either "default" or the only defined container is selected. If no command is specified, opens an interactive shell.
-C, --container
The container to run in
--in
The container version to run the command in
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-e, --environment...
Environment variable to add
-h, --help
Show help message
weka local reset-data
Resets the data directory for a given container, making the host no longer aware of the rest of the cluster
version-name...
The versions to remove
-C, --container
The container to run in
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--clean-unused
Delete all container data directories for versions which aren't the current set version
-f, --force
Force this action without further confirmation. This action is destructive and can potentially lose all data in the cluster.
-h, --help
Show help message
weka local resources
List and control container resources
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--stable
List the resources from the last successful container boot
-h, --help
Show help message
-J, --json
Format output as JSON
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka local resources import
Import resources from file
path*
Path of file to import resources from
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--with-identifiers
Import net device unique identifiers
-h, --help
Show help message
-f, --force
Force this action without further confirmation. This action will override any resource changes that have not been applied, and cannot be undone.
weka local resources export
Export stable resources to file
path*
Path to export resources
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--staging
List the resources from the currently staged resources that were not yet applied
--stable
List the resources from the currently stable resources, which are the last known good resources
-h, --help
Show help message
weka local resources restore
Restore resources from Stable resources
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources apply
Apply changes to resources locally
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-g, --graceful
Restart the container gracefully
-h, --help
Show help message
-f, --force
Force this action without further confirmation. This action will restart the container on this host and cannot be undone.
weka local resources cores
Change the core configuration of the host
cores*
Number of CPU cores dedicated to weka - If set to 0 - no drive could be added to this host
-C, --container
The container name
--frontend-dedicated-cores
Number of cores dedicated to weka frontend (out of the total )
--drives-dedicated-cores
Number of cores dedicated to weka drives (out of the total )
--compute-dedicated-cores
Number of cores dedicated to weka compute (out of the total )
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--core-ids...
Specify the ids of weka dedicated cores
--no-frontends
Don't allocate frontend nodes
--only-drives-cores
Create only nodes with a drives role
--only-compute-cores
Create only nodes with a compute role
--only-frontend-cores
Create only nodes with a frontend role
--allow-mix-setting
Allow specified core-ids even if there are running containers with AUTO core-ids allocation on the same server.
-h, --help
Show help message
weka local resources base-port
Change the port-range used by the container. Weka containers require 100 ports to operate.
base-port*
The first port that will be used by the Weka container, out of a total of 100 ports.
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources memory
Dedicate a set amount of RAM to weka
memory*
Memory dedicated to weka in bytes, set to 0 to let the system decide (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources dedicate
Set the host as dedicated to weka. For example it can be rebooted whenever needed, and configured by weka for optimal performance and stability
on*
Set the host as weka dedicated, off unsets host as weka dedicated (format: 'on' or 'off')
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources bandwidth
Limit weka's bandwidth for the host
bandwidth*
New bandwidth limitation per second (format: either "unlimited" or bandwidth per second in binary or decimal values: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources management-ips
Set the host's management node IPs. Setting 2 IPs will turn this hosts networking into highly-available mode
management-ips...
New IPs for the management nodes
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local resources join-ips
Set the IPs and ports of all hosts in the cluster. This will enable the host to join the cluster using these IPs.
management-ips...
New IP:port pairs for the management processes. If no port is used the command will use the default Weka port
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--restricted
Join using restricted client port
-h, --help
Show help message
weka local resources failure-domain
Set the host failure-domain
-C, --container
The container name
--name
Add this host to a named failure-domain. A failure-domain will be created if it doesn't exist yet.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--auto
Set this host to be a failure-domain of its own
-h, --help
Show help message
weka local resources net
List and control container resources
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--stable
List the resources from the last successful container boot
-h, --help
Show help message
-J, --json
Format output as JSON
weka local resources net add
Allocate a dedicated networking device on a host (to the cluster).
device*
Network device pci-slot/mac-address/interface-name(s)
-C, --container
The container name
--gateway
Default gateway IP. In AWS this value is auto-detected, otherwise the default data networking gateway will be used.
--netmask
Netmask in bits number. In AWS this value is auto-detected, otherwise the default data networking netmask will be used.
--name
If empty, a name will be auto generated.
--label
The name of the switch or network group to which this network device is attached
--vfs
The number of VFs to preallocate (default is all supported by NIC)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--ips...
IPs to be allocated to cores using the device. If not given - IPs may be set automatically according the interface's IPs, or taken from the default networking IPs pool
-h, --help
Show help message
weka local resources net remove
Undedicate a networking device in a host.
name*
Net device name or identifier as appears in weka local resources net
-C, --container
The container name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local setup
Container setup commands
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka local setup services
Setup a local services container
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--disable
Should the container be created as disabled
--no-start
Do not start the container after its creation
-h, --help
Show help message
weka local setup envoy
Setup a local envoy container
-n, --name
The name to give the container
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--disable
Should the container be created as disabled
--no-start
Do not start the container after its creation
-h, --help
Show help message
weka local setup weka
Setup a local weka container
-n, --name
The name to give the container
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--disable
Should the container be created as disabled
--no-start
Do not start the container after its creation
-h, --help
Show help message
weka local setup container
Setup a local weka container
-n, --name
The name to give the container
--cores
Number of CPU cores dedicated to weka - If set to 0 - no drive could be added to this container
--frontend-dedicated-cores
Number of cores dedicated to weka frontend (out of the total )
--drives-dedicated-cores
Number of cores dedicated to weka drives (out of the total )
--compute-dedicated-cores
Number of cores dedicated to weka compute (out of the total )
--memory
Memory dedicated to weka in bytes, set to 0 to let the system decide (format: capacity in decimal or binary units: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--bandwidth
bandwidth limitation per second (format: either "unlimited" or bandwidth per second in binary or decimal values: 1B, 1KB, 1MB, 1GB, 1TB, 1PB, 1EB, 1KiB, 1MiB, 1GiB, 1TiB, 1PiB, 1EiB)
--failure-domain
Add this container to a named failure-domain. A failure-domain will be created if it doesn't exist yet. If not specified, an automatic failure domain will be assigned.
-t, --timeout
Join command timeout in seconds (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--container-id
Designate a container-id that will be used when the container joins the cluster
--base-port
The first port that will be used by the Weka container, out of a total of 100 ports.
--resources-path
Import the container's resources from a file (additional command-line flags specified will override the resources in the file)
--weka-version
Use the specified version to start the container in
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--core-ids...
Specify the ids of weka dedicated cores
--management-ips...
New IPs for the management nodes
--join-ips...
New IP:port pairs for the management processes. If no port is used the command will use the default Weka port
--net...
Network specification - /[ip]/[bits]/[gateway]. Or: 'udp' to enforce UDP and avoid an attempt of auto deduction
--disable
Should the container be created as disabled
--no-start
Do not start the container after its creation
--no-frontends
Don't allocate frontend nodes
--only-drives-cores
Create only nodes with a drives role
--only-compute-cores
Create only nodes with a compute role
--only-frontend-cores
Create only nodes with a frontend role
--only-dataserv-cores
Create only nodes with a dataserv role
--allow-mix-setting
Allow specified core-ids even if there are running containers with AUTO core-ids allocation on the same server.
--dedicate
Set the host as weka dedicated
--force
Create a new container even if a container with the same name exists, disregarding all safety checks!
--ignore-used-ports
Allow container to start even if the required ports are used by other processes
--skip-management-ips-check
Skip The enforcement of management IPs
--client
Create persistent client container
--restricted
Restricted client mode functionality only
-h, --help
Show help message
weka local upgrade
Upgrade a Weka Host Container to its cluster version
-C, --container
The container name
-t, --target-version
Specify a specific target version for upgrade, instead of upgrading to the backend's version.
NOTE - This parameter is
DANGEROUS, use with caution. Incorrect usage may cause upgrade failure.
--upgrade-container-timeout
How long to wait for the container to upgrade. default is 120s (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--prepare-container-timeout
How long to wait for the container to prepare for upgrade. default is 120s (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--container-action-timeout
How long to wait for the container action to run before timing out and retrying 30s (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
--allow-not-ready
Allow starting local upgrade while the container is not fully up
--dont-upgrade-agent
Don't upgrade the weka agent
--upgrade-dependents
Upgrade dependent containers
--all
Upgrade all containers
-h, --help
Show help message
weka mount
Mounts a wekafs filesystem. This is the helper utility installed at /sbin/mount.wekafs.
source*
Source filesystem to mount
target*
Location to mount the source filesystem on
-o, --option
Mount options
-t, --type
The filesystem type
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-n, --no-mtab
Mount without writing in /etc/mtab. This is necessary for example when /etc is on a read-only filesystem
-s, --sloppy
Tolerate sloppy mount options rather than failing
-f, --fake
Causes everything to be done except for the actual system call
-v, --verbose
Verbose mode
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
weka nfs
Commands that manage client-groups, permissions and interface-groups
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs rules
Commands that manage NFS-rules
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs rules add
Commands that add NFS-rules
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs rules add dns
Add a DNS rule to an NFS client group
name*
Group name
dns*
DNS rule with *?[] wildcards rule
--ip
IP with netmask or CIDR rule, in the 1.1.1.1/255.255.0.0 or 1.1.1.1/16 format
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs rules add ip
Add an IP rule to an NFS client group
name*
Group name
ip*
IP with netmask or CIDR rule, in the 1.1.1.1/255.255.0.0 or 1.1.1.1/16 format
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs rules delete
Commands for deleting NFS-rules
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs rules delete dns
Delete a DNS rule from an NFS client group
name*
Group name
dns*
DNS rule with *?[] wildcards rule
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs rules delete ip
Delete an IP rule from an NFS client group
name*
Group name
ip*
IP with netmask or CIDR rule, in the 1.1.1.1/255.255.0.0 or 1.1.1.1/16 format
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs client-group
Lists NFS client groups
--name
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,name,rules
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs client-group add
Create an NFS client group
name*
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: name,rules
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs client-group delete
Delete an NFS client group
name*
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected NFS clients and can be undone by re-creating the client group.
-h, --help
Show help message
weka nfs permission
List NFS permissions for a filesystem
--filesystem
File system name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,filesystem,group,path,type,squash,auid,agid,obsdirect,manageGids,options,customOptions,privilegedPort,priority,supportedVersions,enabledAuthTypes
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs permission add
Allow a client group to access a file system
filesystem*
File system name
group*
Client group name
--path
path [default: /]
--permission-type
Permission type (format: 'ro' or 'rw')
--root-squashing
Root squashing (format: 'on' or 'off')
--squash
Permission squashing. NOTE - The option 'all' can be used only on interface groups with --allow-manage-gids=on (format: 'none', 'root' or 'all')
--anon-uid
Anonymous UID to be used instead of root when root squashing is enabled
--anon-gid
Anonymous GID to be used instead of root when root squashing is enabled
--obs-direct
Obs direct (format: 'on' or 'off')
--manage-gids
the list of group ids received from the client will be replaced by a list of group ids determined by an appropriate lookup on the server. NOTE - this only works with a interface group which allows manage-gids (format: 'on' or 'off')
--privileged-port
Privileged port (format: 'on' or 'off')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--supported-versions...
A comma-separated list of supported NFS versions (format: 'v3' or 'v4')
--enable-auth-types...
A comma-separated list of NFS authentication types -- none, sys, krb5, krb5i, krb5p (format: 'none', 'sys', 'krb5', 'krb5i' or 'krb5p')
-f, --force
Force this action without further confirmation. This action will affect all NFS users of this permission/export, Use it with caution and consult the Weka Customer Success team at need.
-h, --help
Show help message
weka nfs permission update
Edit a file system permission
filesystem*
File system name
group*
Client group name
--path
path [default: /]
--permission-type
Permission type (format: 'ro' or 'rw')
--root-squashing
Root squashing (format: 'on' or 'off')
--squash
Permission squashing. NOTE - The option 'all' can be used only on interface groups with --allow-manage-gids=on (format: 'none', 'root' or 'all')
--anon-uid
Anonymous UID to be used instead of root when root squashing is enabled
--anon-gid
Anonymous GID to be used instead of root when root squashing is enabled
--obs-direct
Obs direct (format: 'on' or 'off')
--manage-gids
the list of group ids received from the client will be replaced by a list of group ids determined by an appropriate lookup on the server. NOTE - this only works with a interface group which allows manage-gids (format: 'on' or 'off')
--custom-options
Custom export options
--privileged-port
Privileged port (format: 'on' or 'off')
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--supported-versions...
A comma-separated list of supported NFS versions (format: 'v3' or 'v4')
--enable-auth-types...
A comma-separated list of NFS authentication types -- none, sys, krb5, krb5i, krb5p (format: 'none', 'sys', 'krb5', 'krb5i' or 'krb5p')
--force
Force this action without further confirmation
-h, --help
Show help message
weka nfs permission delete
Delete a file system permission
filesystem*
File system name
group*
Client group name
--path
path [default: /]
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected NFS clients and can be undone by re-creating the filesystem permission.
-h, --help
Show help message
weka nfs interface-group
List interface groups
--name
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,name,mask,gateway,type,status,ips,ports,allowManageGids
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs interface-group assignment
List the currently assigned interface for each floating-IP address in the given interface-group. If is not supplied, assignments for all floating-IP addresses will be listed
--name
Group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: ip,host,port,group
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs interface-group add
Create an interface group
name*
Interface group name
type*
Group type. cli subnet type can be NFS
--subnet
subnet mask in the 255.255.0.0 format
--gateway
gateway ip
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: name,mask,gateway,type,status,ips,ports,allowManageGids
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs interface-group update
Update an interface group
name*
Interface group name
--subnet
subnet mask in the 255.255.0.0 format
--gateway
gateway ip
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs interface-group delete
Delete an interface group
name*
Interface group name
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected NFS clients and can be undone by re-creating the interface group.
-h, --help
Show help message
weka nfs interface-group ip-range
Commands that manage nfs interface-groups' ip-ranges
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs interface-group ip-range add
Add an ip range to an interface group
name*
Interface group name
ips*
IP range
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs interface-group ip-range delete
Delete an ip range from an interface group
name*
Interface group name
ips*
IP range
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected NFS clients and can be undone by re-creating the IP range.
-h, --help
Show help message
weka nfs interface-group port
Commands that manage nfs interface-groups' ports
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs interface-group port add
Add a server port to an interface group
name*
Interface group name
server-id*
Server ID on which the port resides
port*
Port's device. (e.g. eth1)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs interface-group port delete
Delete a server port from an interface group
name*
Interface group name
server-id*
Server ID on which the port resides
port*
Port's device. (e.g. eth1)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --force
Force this action without further confirmation. This action may disrupt IO service for connected NFS clients and can be undone by re-adding the port.
-h, --help
Show help message
weka nfs debug-level
Manage debug level for nfs servers.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs debug-level show
Get debug level for nfs servers.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
--nfs-hosts...
Only return these host IDs (pass weka's host id as a number). All hosts as default
-o, --output...
Specify which columns to output. May include any of the following: host,debugLevel,component
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs debug-level set
Set debug level for nfs servers. Return to default (EVENT) when finish debugging.
level*
The debug level, can be one of this options: EVENT, INFO, DEBUG, MID_DEBUG, FULL_DEBUG
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--nfs-hosts...
Hosts to set debug level (pass weka's host id as a number). All hosts as default
-h, --help
Show help message
weka nfs global-config
NFS Global Configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs global-config set
Set NFS global configuration options
--mountd-port
Configure the port number of the mountd service
--config-fs
config filesystem name, use "" to invalidate
--lockmgr-port
The alternate port for the nfs lock manager (default: 0 means any available port)
--statmon-port
The alternate port for the nfs status monitor (default: 0 means any available port)
--notify-port
The alternate port for notification used in NFSv3 (default: 0 means any available port)
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--default-supported-versions...
A comma-separated list of the default supported NFS versions for new permissions (format: 'v3' or 'v4')
--enable-auth-types...
A comma-separated list of NFS authentication types -- none, sys, krb5, krb5i, krb5p for permissions (format: 'none', 'sys', 'krb5', 'krb5i' or 'krb5p')
-h, --help
Show help message
-f, --force
Force this action without further confirmation. This may cause a temporary disruption in the NFS service.
weka nfs global-config show
Show the NFS global configuration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
-J, --json
Format output as JSON
weka nfs clients
NFS Clients usage information
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs clients show
Show NFS Clients usage information. If no options are given, all NFS Ganesha containers will be selected.
--interface-group
interface-group-name
--container-id
container-id
--fip
floating-ip
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: hostid,client_ip,idle_time,num_v3_ops,num_v4_ops,num_v4_open_ops,num_v4_close_ops
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs kerberos
NFS Kerberos Commands
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs kerberos service
NFS Kerberos service
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs kerberos service setup
Setup the NFS Kerberos Service information. Running this command with the restart option can disrupt IO service
for connected NFS clients.
kdc-realm-name*
KDC Realm Name
kdc-primary-server*
KDC Primary Server
kdc-admin-server*
KDC Admin Server
--kdc-secondary-server
KDC Secondary Server
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action when the service is already configured (default: false)
--restart
Restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs kerberos service show
Show NFS Kerberos service setup information
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: realm_name,primary_server,secondary_server,admin_server,generation_id,service_status
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs kerberos registration
NFS Kerberos service registration
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs kerberos registration setup-ad
Register NFS Kerberos service with Microsoft Active Directory. Running this command with the restart option can
disrupt IO service for connected NFS clients.
nfs-service-name*
NFS FQDN Service Name (Maximum 20 characters for hostname in FQDN
realm-admin-name*
KDC Realm Admin Name
realm-admin-passwd
KDC Realm Admin password
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action when the service is already registered (default: false)
--restart
Don't restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs kerberos registration setup-mit
Register NFS Kerberos service with MIT KDC. Running this command with the restart option can disrupt IO service
for connected NFS clients.
nfs-service-name*
NFS FQDN Service Name
keytab-file*
Path to keytab file
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action when the service is already registered (default: false)
--restart
Don't restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs kerberos registration show
Show NFS Kerberos service registration information
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: nfs_service_name,kdc_type,generation_id,registration_status
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs kerberos reset
Wipe out NFS Kerberos Service configuration information. Running this command without the no-restart option can
disrupt IO service for connected NFS clients.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action without further confirmation (default: false)
--no-restart
Don't restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs ldap
NFS LDAP Commands
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-h, --help
Show help message
weka nfs ldap setup-ad
Setup configuration information for NFS to use Active Directory LDAP. Running this command without the no-restart
option can disrupt IO service for connected NFS clients.
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action when Active Directory LDAP client is already setup (default: false)
--no-restart
Don't restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs ldap setup-openldap
Setup configuration information for NFS to use OpenLDAP. Running this command without the no-restart option can
disrupt IO service for connected NFS clients.
server-name*
OpenLDAP Server Name
ldap-domain*
OpenLDAP Domain
reader-user-name*
OpenLDAP Reader User Name (DN based name e.g. cn=readonly-user,dc=test,dc=example,dc=com)
reader-user-password
OpenLDAP Reader User password
--base-dn
OpenLDAP Base DN (e.g. dc=myldapdomain,dc=example,dc=com)
--ldap-port-number O
penLDAP Port Number (default: 389)
--color S
pecify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST S
pecify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT S
pecify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT T
imeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w,
i
nfinite/unlimited)
-T, --TIMEOUT T
imeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w,
--force F
orce this action when OpenLDAP client is already setup (default: false)
--no-restart D
on't restart NFS-W containers to apply changes (default: false)
-h, --help S
how help message
weka nfs ldap import-openldap
Import configuration information for NFS to use OpenLDAP. Running this command without the no-restart option can
disrupt IO service for connected NFS clients.
server-name*
OpenLDAP Server Name
ldap-domain*
OpenLDAP Domain
sssd-conf-file*
Path to sssd configuration file
idmapd-conf-file*
Path to idmapd configuration file
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--verify
verify connectivity with the OpenLDAP server (default: false)
--force
Force this action when OpenLDAP client is already setup (default: false)
--no-restart
Don't restart NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka nfs ldap export-openldap
Export in use configuration information for NFS to use OpenLDAP.
server-name*
OpenLDAP Server Name
ldap-domain*
OpenLDAP Domain
sssd-conf-file*
Path to sssd configuration file
idmapd-conf-file*
Path to idmapd configuration file
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-h, --help
Show help message
weka nfs ldap show
Show NFS LDAP setup information
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: server_type,domain,server_name,server_port,base_dn,reader_name,reader_password,generation_id,setup_status
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka nfs ldap reset
Wipe out NFS LDAP configuration information, This action may disrupt IO service for connected NFS clients if used without no-restart option
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
--force
Force this action without further confirmation (default: false)
--no-restart
Don't restart the NFS-W containers to apply changes (default: false)
-h, --help
Show help message
weka org
List organizations defined in the Weka cluster
--color
Specify whether to use color in output (format: 'auto', 'disabled' or 'enabled')
-H, --HOST
Specify the host. Alternatively, use the WEKA_HOST env variable
-P, --PORT
Specify the port. Alternatively, use the WEKA_PORT env variable
-C, --CONNECT-TIMEOUT
Timeout for connecting to cluster, default: 10 secs (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-T, --TIMEOUT
Timeout to wait for response, default: 1 minute (format: 3s, 2h, 4m, 1d, 1d5h, 1w, infinite/unlimited)
-f, --format
Specify in what format to output the result (format: 'view', 'csv', 'markdown', 'json' or 'oldview')
-o, --output...
Specify which columns to output. May include any of the following: uid,id,name,allocSSD,quotaSSD,allocTotal,quotaTotal
-s, --sort...
Specify which column(s) to take into account when sorting the output. May include a '+' or '-' before the column name to sort in ascending or descending order respectively. Usage: [+
-F, --filter...
Specify what values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
-h, --help
Show help message
-R, --raw-units
Print values in raw units (bytes, seconds, etc.). When not set, sizes are printed in human-readable format, e.g 1KiB 234MiB 2GiB.
-U, --UTC
Print times in UTC. When not set, times are converted to the local time of this host.
--no-header
Don't show column headers when printing the output
-v, --verbose
Show all columns in output
weka org create
Create a new organization in the Weka cluster
name*
Organization name
username*
Username of organization admin
password