Manage SMB using the CLI

This page provides procedures for setting up an SMB cluster over WEKA filesystems and managing the cluster itself, using the CLI.

Using the CLI, you can manage both the SMB-W and legacy SMB:

Show the SMB cluster

Command: weka smb cluster

Use this command to view information about the SMB cluster managed by the WEKA system.

Show the SMB domain configuration

Command: weka smb domain

Use this command to view information about the SMB domain configuration.

Create the SMB cluster

Command: weka smb cluster create

Use the following command line to create a new SMB cluster to be managed by the WEKA system:

weka smb cluster create <netbios-name> <domain> [--domain-netbios-name domain-netbios-name] [--idmap-backend idmap-backend] [--default-domain-mapping-from-id default-domain-mapping-from-id] [--default-domain-mapping-to-id default-domain-mapping-to-id] [--joined-domain-mapping-from-id joined-domain-mapping-from-id] [--joined-domain-mapping-to-id joined-domain-mapping-to-id] [--encryption encryption] [--smb-conf-extra smb-conf-extra] [--container-ids container-ids]... [--smb-ips-pool smb-ips-pool]... [--smb-ips-range smb-ips-range]...

To create an SMB-W cluster, contact the Customer Success Team.

Note: As a best practice, it is recommended to have only one of the following protocol containers, NFS, SMB, or S3, installed on the same server. Starting from version 4.2, setting more than one additional protocol to the existing POSIX is not allowed.

Parameters

Name

Type

Value

Limitations

Mandatory

Default

netbios-name

String

NetBIOS name for the SMB cluster

Must be a valid name (ASCII)

Yes

domain

String

The domain to join the SMB cluster to

Must be a valid name (ASCII)

Yes

domain-netbios-name

String

Domain NetBIOS name.

Must be a valid name (ASCII)

No

The first part of the domain parameter

idmap-backend

String

The ID mapping method to use.

SMB-W: rfc2307 Legacy SMB: rfc2307 or rid

No

rfc2307

default-domain-mapping-from-id

Number

The last ID of the range for the default AD ID mapping (for trusted domains that have no range defined).

Not supported in SMB-W yet

No

4290000000

joined-domain-mapping-from-id

Number

The first ID of the range for the main AD ID mapping.

None

No

4290000000

joined-domain-mapping-to-id

Number

The last ID of the range for the main AD ID mapping.

None

No

4290000001

encryption

String

The global encryption policy to use.

enabled - enables encryption negotiation but doesn't turn it on automatically for supported sessions and share connections.

disabled - doesn't support encrypted connections.

desired - enables encryption negotiation and turns on data encryption on supported sessions and share connections.

required - enforces data encryption on sessions and share connections. Clients that do not support encryption will be denied access to the server.

SMB-W: enabled, desired or required Legacy SMB: enabled, disabled, desired or required

No

enabled

smb-conf-extra

String

Additional SMB configuration options.

None

No

container-ids

Number

The container IDS of the containers with the frontend process to serve the SMB service.

Minimum of 3 containers

smb-ips-pool

Comma-separated IP addresses

The public IPs used as floating IPs for the SMB cluster to serve the SMB over and thereby provide HA. Do not assign these IPs to any server on the network.

Must be valid IP addresses

No

smb-ips-range

IP address range

The public IPs used as floating IPs for the SMB cluster to serve the SMB over and thereby provide HA. Do not assign these IPs to any server on the network.

Format: A.B.C.D-E

Example: 10.10.0.1-100

No

Note: To enable HA through IP takeover, all IPs must reside on the same subnet.

Note: The IPs must be configured but MUST NOT be in use by any other application/server in the subnet, including WEKA system management nodes, WEKA system IO nodes, or WEKA system NFS floating IPs. In AWS environments, this is not supported and these IPs should not be provided**.**

Note: The --smb-ips parameter is supposed to accept the public IPs that the SMB cluster will expose. To mount the SMB cluster in an HA manner, clients should be mounted via one of the exposed public IPs, thereby ensuring that they will automatically reconnect if one of the SMB containers fails.

Note: If it is necessary to set global options to the SMB library, contact the Customer Success Team.

For Example:

weka smb cluster create wekaSMB mydomain --container-ids 0,1,2,3,4 --smb-ips-pool 1.1.1.1,1.1.1.2 --smb-ips-range 1.1.1.3-5

In this example of a full command, an SMB cluster is configured over the WEKA system containers 0-4. The SMB cluster is called wekaSMB,the domain name is called mydomainand is directed to use public IPs 1.1.1.1 to 1.1.1.5.

Update the SMB cluster

Command: weka smb cluster update

Use the following command line to update an existing SMB cluster:

weka smb cluster update [--encryption encryption] [--smb-ips-pool smb-ips-pool]... [--smb-ips-range smb-ips-range]

Parameters

Name

Type

Value

Limitations

Mandatory

encryption

String

The global encryption policy to use.

enabled - enables encryption negotiation but doesn't turn it on automatically for supported sessions and share connections.

disabled - doesn't support encrypted connections.

desired - enables encryption negotiation and turns on data encryption on supported sessions and share connections.

required - enforces data encryption on sessions and share connections. Clients that do not support encryption are denied access to the server.

SMB-W: enabled, desired or required Legacy SMB: enabled, disabled, desired or required

No

smb-ips-pool

Comma-separated IP addresses

The public IPs used as floating IPs for the SMB cluster to serve the SMB over and thereby provide HA. The IPs should not be assigned to any host on the network.

Must be valid IP addresses

No

smb-ips-range

IP address range

The public IPs used as floating IPs for the SMB cluster to serve the SMB over and thereby provide HA. Do not assign IPs to any host on the network.

Format: A.B.C.D-E

E.g., 10.10.0.1-100

No​


Check the status of SMB cluster readiness

Command: weka smb cluster status

The SMB cluster is comprised of a few SMB containers. Use this command to check the status of the SMB containers that are part of the SMB cluster. Once all the SMB containers are prepared and ready, it is possible to join an SMB cluster to an Active Directory.

Join an SMB cluster in Active Directory

Command: weka smb domain join

Use the following command line to join an SMB domain in an Active Directory:

weka smb domain join <username> <password> [--server server] [--create-computer create-computer]

Parameters

Name

Type

Value

Limitations

Mandatory

Default

username

String

Name of a user with permission to add a server to the domain.

Must be a valid name (ASCII)

Yes

password

String

The password of the user.

Must be a valid password (ASCII)

Yes

server

String

Weka identifies the AD server automatically based on the AD name. You do not need to set the server name. In some cases, if required, specify the AD server.

Must be valid Not applicable for SMB-W yet

No

The AD server is automatically identified based on the AD name.

create-computer

String

The default organization unit is the Computers directory. You can define any other directory to connect to in Active Directory, such as SMB servers or Corporate computers.

Must be valid Not applicable for SMB-W yet

No

The computer's directory

To join the SMB cluster to another Active Directory, leave the current Active Directory using the following command line:

weka smb domain leave <username> <password>

On completion of this operation, it is possible to join the SMB cluster to another Active Directory.

Delete an SMB cluster

Command: weka smb cluster destroy

Use this command to destroy an SMB cluster managed by the Weka system.

Deleting an existing SMB cluster managed by the Weka system does not delete the backend Weka filesystems but removes the SMB share exposures of these filesystems.

Add or remove SMB cluster containers

Command: weka smb cluster containers add

Command: weka smb cluster containers remove

Use these commands to add or remove containers from the SMB cluster.

weka smb cluster containers add [--containers-id containers-id]...

weka smb cluster containers remove [--containers-id containers-id]...

Note: This operation might take some time to complete. During that time, SMB IOs are stalled.

Parameters

Name

Type

Value

Limitations

Mandatory

Default

containers-id

Comma-separated strings

Container IDs of containers with a frontend process to serve the SMB service.

Minimum of 3 containers must be supplied.

Yes

Configure trusted domains

Note: SMB-W does not yet support trusted domains.

List trusted domains

Command: weka smb cluster trusted-domains

Use this command to list all the configured trusted domains and their ID ranges.

Add trusted domains

Command: weka smb cluster trusted-domains add

Use the following command line to add an SMB trusted domain:

weka smb cluster trusted-domains add <domain-name> <from-id> <to-id>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

domain-name

String

The name of the domain being added

Must be a valid name (ASCII)

Yes

from-id

Number

The first ID of the range for the domain ID mapping

The range cannot overlap with other domains

Yes

to-id

Number

The last ID of the range for the domain ID mapping

The range cannot overlap with other domains

Yes

Remove trusted domains

Command: weka smb cluster trusted-domains remove

Use the following command line to remove an SMB-trusted domain:

weka smb cluster trusted-domains remove <domain-id>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

domain-id

Number

The internal ID of the domain to remove

Yes

List SMB shares

Command: weka smb share

Use this command to list all existing SMB shares.

Add an SMB share

Command: weka smb share add

Use the following command line to add a new share to be exposed to SMB:

weka smb share add <share-name> <fs-name> [--description description] [--internal-path internal-path] [--file-create-mask file-create-mask] [--directory-create-mask directory-create-mask] [--obs-direct obs-direct] [--encryption encryption] [--read-only read-only] [--user-list-type user-list-type] [--users users]... [--allow-guest-access allow-guest-access] [--hidden hidden]

The mount mode for the SMB share is readcache and cannot be modified.

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-name

String

Valid name of the share to add

The share name must meet the following requirements:

  • The share name must be no more than 80 characters in length.

  • The share name must not include the following characters: backslash (\), slash (/), colon (:), and semicolon (;).

  • Control characters in the range 0x00 through 0x1F (inclusive) are prohibited.

SMB-W: you cannot create the same share name with different case insensitivity.

Yes

fs-name

String

Name of the filesystem to share

Must be a valid name. A filesystem set with required authentication cannot be used for SMB share.

Yes

description

String

Description of what the share will receive when viewed remotely

Must be a valid string

No

internal-path

String

The internal path within the filesystem (relative to its root) which will be exposed

Must be a valid path

No

.

file-create-mask

String

POSIX permissions for the file created through the SMB share

Numeric (octal) notation

No

0744

directory-create-mask

String

POSIX permissions for directories created through the SMB share

Numeric (octal) notation. SMB-W: the specified string must be greater or equal to 0600.

No

0755

acl

String

Enable Windows ACLs on the share (which will be translated to POSIX)

on or off;

Up to 16 ACEs per file

No

off

obs-direct

String

Legacy SMB: on or off SMB-W: not supported

No

off

encryption

String

The share encryption policy.

cluster_default: The he share encryption policy follows the global SMB cluster setting.

desired: If negotiation is enabled globally, it turns on data encryption for this share for clients that support encryption.

required: Enforces encryption for the shares. Clients that do not support encryption are denied when accessing the share. If the global option is disabled, the access is restricted to these shares for all clients.

SMB-W: cluster_default Legacy SMB: cluster_default , desired or required

No

cluster_default

read-only

String

Sets the share as read-only. Users cannot create or modify files in this share.

on or off

No

off

user-list-type

String

The type of initial permissions list for users

SMB-W: not supported Legacy SMB: read_only : List of users that will not be given write access to the share, regardless of the read-only setting. read_write: List of users that are given write access to the share, regardless of the read-only setting.

valid : List of users that are allowed to log-in to this share SMB service (empty list all users are allowed)invalid - list of users that are not allowed to log-in to this share SMB service

No

users

A comma-separated list of Strings

A list of users to use with the user-list-type list. Can use the @ notation to allow groups of users, e.g. root, Jack, @domain\admins

SMB-W: not supported Legacy SMB: Up to 8 users/groups for all lists combined per share

No

Empty list

allow-guest-access

String

Allows connecting to the SMB service without a password. Permissions are as the nobody user account permissions.

Legacy SMB: on or off SMB-W: not supported

No

off

hidden

String

Sets the share as non-browsable. It will be accessible for mounting and IOs but not discoverable by SMB clients.

on or off

No

off

Note: If it is necessary to set a share with specific options to the SMB library, contact Weka support.

Example: The following is an example for adding users to a share mounted on a filesystem named "default":

weka smb share add rootShare default weka smb share add internalShare default --internal-path some/dir --description "Exposed share"

In this example, the first SMB share added has the Weka system share for default. The second SMB share has internal for default.

Update SMB shares

Command: weka smb share update

Use the following command line to update an existing share:

weka smb share update <share-id> [--encryption encryption] [--read-only read-only] [--allow-guest-access allow-guest-access] [--hidden hidden]

Note: SMB-W does not yet support share update.

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to update

Must be a valid share ID

Yes

encryption

String

The share encryption policy.

desired - turns on data encryption for this share for clients that support encryption if negotiation has been enabled globally.

required - enforces encryption for the shares. Clients that do not support encryption will be denied access to the share. If the global option is set to disabled access will be denied to these shares for all clients.

cluster_default desired or required

No

read-only

String

Mount the SMB share as read-only.

on or off

No

allow-guest-access

String

Allow guest access

on or off

No

hidden

String

Hide the the SMB share.

on or off

StringNo

Control SMB share user-lists

Note: SMB-W does not yet support share user-lists.

Command: weka smb share lists show

Use this command to view the various user-list settings.


Command: weka smb share lists add

Use the following command line to add users to a share user-list:

weka smb share lists add <share-id> <user-list-type> <--users users>...

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes

user-list-type

String

The type of permissions list for users

read_only - list of users that will not be given write access to the share, regardless of the read-only setting.

read_write- list of users that will be given write access to the share, regardless of the read-only setting.

valid - list of users that are allowed to log-in to this share SMB service (empty list - all users are allowed)invalid - list of users that are not allowed to log-in to this share SMB service

Yes

users

A comma-separated list of Strings

A list of users to add to the user-list-type list. Can use the @ notation to allow groups of users, e.g. root, Jack, @domain\admins

Up to 8 users/groups for all lists combined per share

Yes


Command: weka smb share lists remove

Use the following command line to remove users from a share user-list:

weka smb share lists remove <share-id> <user-list-type> <--users users>...

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes

user-list-type

String

The type of permissions list for users

read_only - list of users that will not be given write access to the share, regardless of the read-only setting.

read_write- list of users that will be given write access to the share, regardless of the read-only setting.

valid - list of users that are allowed to log-in to this share SMB service (empty list - all users are allowed)invalid - list of users that are not allowed to log-in to this share SMB service

Yes

users

A comma-separated list of Strings

A list of users to remove from the user-list-type list. Can use the @ notation to allow groups of users, e.g. root, Jack, @domain\admins

Up to 8 users/groups for all lists combined per share

Yes


Command: weka smb share lists reset

Use the following command line to remove all users from a share user-list:

weka smb share lists reset <share-id> <user-list-type>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes

user-list-type

String

The type of permissions list to reset

read_only - list of users that will not be given write access to the share, regardless of the read-only setting.

read_write- list of users that will be given write access to the share, regardless of the read-only setting.

valid - list of users that are allowed to log-in to this share SMB service (empty list - all users are allowed)invalid - list of users that are not allowed to log-in to this share SMB service

Yes

Remove SMB shares

Command: weka smb share remove

Use the following command line to remove a share exposed to SMB:

weka smb share remove <share-id>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

String

The ID of the share to be removed

Must be a valid share ID

Yes

Example: The following is an example of removing an SMB share defined as ID 1:

weka smb share remove 1

Control SMB access based on hosts' IP/name

It is possible to control which hosts are permitted to access the SMB service or share.

Note: SMB-W does not yet support access based on hosts' IP/name.

Command: weka smb cluster host-access list

weka smb share host-access list

Use this command to view the various host access settings.

Command: weka smb cluster host-access add

weka smb share host-access add

Use the following command line to add a host to the allow/deny list (at either cluster level or share level):

weka smb cluster host-access add <mode> <--ips ips> <--hosts hosts>

weka smb share host-access add <share-id> <mode> <--ips ips> <--hosts hosts>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes (for the share-level command)

mode

String

The access mode of the host

allow or deny

Yes

ips

A Comma-separated list of IPs

Host IP addresses to allow or deny

Supports the following format to provide multiple IPs:

192.

192.168. 192.168.1 192.168.1.1/24

Must provide at least one of: ips or containers

hosts

A Comma-separated list of strings

Host names to allow/deny

Must provide at least one of: ips or containers

Command: weka smb cluster host-access remove / weka smb share host-access remove

Use the following command line to remove hosts from the allow or deny list (at either cluster level or share level):

weka smb cluster host-access remove <hosts>

weka smb share host-access remove <share-id> <hosts>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes (for the share-level command)

hosts

Space-separated list of hosts

The hosts to remove from the host-access list

Must be the exact name as shown under the HOSTNAME column in the equivalent list command

Yes

Command: weka smb cluster host-access reset

weka smb share host-access reset

Use the following command line to remove all containers from the allow or deny list (at either cluster level or share level):

weka smb cluster host-access reset <mode>

weka smb share host-access reset <share-id> <mode>

Parameters

Name

Type

Value

Limitations

Mandatory

Default

share-id

Number

The ID of the share to be updated

Must be a valid share ID

Yes (for the share-level command)

mode

String

All hosts with this access mode will be removed from the list

allow or deny

Yes

Last updated