Manage object stores using the CLI
This page describes how to view and manage object stores using the CLI.
Using the CLI, you can perform the following actions:
View object stores
Command: weka fs tier obs
This command is used to view information on all the object stores configured to the WEKA system.
Note: Using the GUI only object-store buckets are present. Adding an object-store bucket will add it to the only local
or remote
object-store present. If more than one is present (such as during the time recovering from a remote snapshot), the CLI should be used.
Edit an object store
Command: weka fs tier obs update
Use the following command line to edit an object store:
weka fs tier obs update <name> [--new-name new-name] [--site site] [--hostname=<hostname>] [--port=<port>] [--auth-method=<auth-method>] [--region=<region>] [--access-key-id=<access-key-id>] [--secret-key=<secret-key>] [--protocol=<protocol>] [--bandwidth=<bandwidth>] [--download-bandwidth=<download-bandwidth>] [--upload-bandwidth=<upload-bandwidth>] [--max-concurrent-downloads=<max-concurrent-downloads>] [--max-concurrent-uploads=<max-concurrent-uploads>] [--max-concurrent-removals=<max-concurrent-removals>] [--enable-upload-tags=<enable-upload-tags>]
Parameters
Name
Type
Value
Limitations
Mandatory
Default
name
String
Name of the object store being created
Must be a valid name
Yes
new-name
String
New name for the object store
Must be a valid name
No
site
String
local
- for tiering+snapshots, remote
- for snapshots only
local
or remote
No
hostname
String
Object store host identifier, to be used as a default for added buckets
Must be a valid name/IP
No
port
String
Object store port, to be used as a default for added buckets
Must be a valid name
No
auth-method
String
Authentication method, to be used as a default for added buckets
None
, AWSSignature2
or AWSSignature4
No
region
String
Region name, to be used as a default for added buckets
No
access-key-id
String
Object store access key ID, to be used as a default for added buckets
No
secret-key
String
Object store secret key, to be used as a default for added buckets
No
protocol
String
Protocol type, to be used as a default for added buckets
HTTP
, HTTPS
or HTTPS_UNVERIFIED
No
bandwidth
Number
Bandwidth limitation per core (Mbps)
No
download-bandwidth
Number
Object-store download bandwidth limitation per core (Mbps)
No
upload-bandwidth
Number
Object-store upload bandwidth limitation per core (Mbps)
No
max-concurrent-downloads
Number
Maximum number of downloads concurrently performed on this object store in a single IO node
1-64
No
max-concurrent-uploads
Number
Maximum number of uploads concurrently performed on this object store in a single IO node
1-64
No
max-concurrent-removals
Number
Maximum number of removals concurrently performed on this object store in a single IO node
1-64
No
enable-upload-tags
String
true
or false
No
View object store buckets
Command: weka fs tier s3
This command is used to view information on all the object-store buckets configured to the WEKA system.
Add an object store bucket
Command: weka fs tier s3 add
Use the following command line to add an object store:
weka fs tier s3 add <name> [--site site] [--obs-name obs-name] [--hostname=<hostname>] [--port=<port> [--bucket=<bucket>] [--auth-method=<auth-method>] [--region=<region>] [--access-key-id=<access-key-id>] [--secret-key=<secret-key>] [--protocol=<protocol>] [--bandwidth=<bandwidth>] [--download-bandwidth=<download-bandwidth>] [--upload-bandwidth=<upload-bandwidth>] [--errors-timeout=<errors-timeout>] [--prefetch-mib=<prefetch-mib>] [--enable-upload-tags=<enable-upload-tags>]
Parameters
Name
Type
Value
Limitations
Mandatory
Default
name
String
Name of the object-store bucket being created
Must be a valid name
Yes
site
String
local
- for tiering+snapshots, remote
- for snapshots only
Must be the same as the object store site it is added to (obs-name)
No
local
obs-name
String
Name of the object-store to add this object-store bucket to
Must be an existing object-store
No
If there is only one object-store of type mentioned in site
it is chosen automatically
hostname
String
Object store host identifier
Must be a valid name/IP
Yes, if not specified in the object-store level
The hostname
specified in obs-name
if present
port
String
Object store port
Must be a valid name
No
The port
specified in obs-name
if present, otherwise 80
bucket
String
Object store bucket name
Must be a valid name
Yes
auth-method
String
Authentication method
None
, AWSSignature2
or AWSSignature4
Yes, if not specified in the object-store level
The auth-method
specified in obs-name
if present
region
String
Region name
Yes, if not specified in the object-store level
The region
specified in obs-name
if present
access-key-id
String
Object store bucket access key ID
Yes, if not specified in the object-store level (can be left empty when using IAM role in AWS)
The access-key-id
specified in obs-name
if present
secret-key
String
Object store bucket secret key
Yes, if not specified in the object-store level (can be left empty when using IAM role in AWS)
The secret-key
specified in obs-name
if present
protocol
String
Protocol type to be used
HTTP
, HTTPS
or HTTPS_UNVERIFIED
No
The protocol
specified in obs-name
if present, otherwiseHTTP
bandwidth
Number
Bucket bandwidth limitation per core (Mbps)
No
download-bandwidth
Number
Bucket download bandwidth limitation per core (Mbps)
No
upload-bandwidth
Number
Bucket upload bandwidth limitation per core (Mbps)
No
errors-timeout
Number
If the object-store link is down for longer than this timeout period, all IOs that need data return with an error
1-15 minutes, e.g: 5m or 300s
No
300
prefetch-mib
Number
How many MiB of data to prefetch when reading a whole MiB on the object store
No
0
enable-upload-tags
String
true
or false
No
false
Note: When using the CLI, by default a misconfigured object store will not be created. To create an object store even when it is misconfigured, use the --skip-verification
option.
Note: The max-concurrent
settings are applied per Weka compute process and the minimum setting of all object stores is applied.
Make the relevant changes and click Update to update the object store bucket.
Edit an object store bucket
Command: weka fs tier s3 update
Use the following command line to edit an object-store bucket:
weka fs tier s3 update <name> [--new-name=<new-name>] [--new-obs-name new-obs-name] [--hostname=<hostname>] [--port=<port> [--bucket=<bucket>] [--auth-method=<auth-method>] [--region=<region>] [--access-key-id=<access-key-id>] [--secret-key=<secret-key>] [--protocol=<protocol>] [--bandwidth=<bandwidth>] [--download-bandwidth=<download-bandwidth>] [--upload-bandwidth=<upload-bandwidth>] [--errors-timeout=<errors-timeout>] [--prefetch-mib=<prefetch-mib>] [--enable-upload-tags=<enable-upload-tags>]
Parameters
Name
Type
Value
Limitations
Mandatory
Default
name
String
Name of the object-store bucket being edited
Must be a valid name
Yes
new-name
String
New name for the object-store bucket
Must be a valid name
No
new-obs-name
String
New name of the object-store to add this object-store bucket to
Must be an existing object-store, with the same site
value.
No
hostname
String
Object store host identifier
Must be a valid name/IP
No
port
String
Object store port
Must be a valid name
No
bucket
String
Object store bucket name
Must be a valid name
No
auth-method
String
Authentication method
None
, AWSSignature2
or AWSSignature4
No
region
String
Region name
No
access-key-id
String
Object-store bucket access key ID
No
secret-key
String
Object-store bucket secret key
No
protocol
String
Protocol type to be used
HTTP
, HTTPS
or HTTPS_UNVERIFIED
No
bandwidth
Number
Bandwidth limitation per core (Mbps)
No
download-bandwidth
Number
Bucket download bandwidth limitation per core (Mbps)
No
upload-bandwidth
Number
Bucket upload bandwidth limitation per core (Mbps)
No
errors-timeout
Number
If the object-store link is down for longer than this timeout period, all IOs that need data return with an error
1-15 minutes, e.g: 5m or 300s
No
prefetch-mib
Number
How many MiB of data to prefetch when reading a whole MiB on the object store
No
enable-upload-tags
String
true
or false
No
List recent operations of an object store bucket
Command: weka fs tier ops
Use the following command line to list the recent operations running on an object store:
weka fs tier ops <name> [--format format] [--output output]...[--sort sort]...[--filter filter]...[--raw-units] [--UTC] [--no-header] [--verbose]
Parameters
Name
Type
Value
Limitations
Mandatory
Default
name
String
Name of the object store bucket to show its recent operations.
Must be a valid name
Yes
format
String
Specify the output format.
Available options: view
, csv
, markdown
, json
, or oldview
No
view
output
String
Specify the columns in the output.
Available columns:
node
, obsBucket
, key
, type
, execution
, phase
, previous
, start
, size
, results
, errors
, lastHTTP
, concurrency
, inode
No
All columns
sort
String
Specify the column(s) to consider when sorting the output. For the sorting order, ascending or descending, add - or + signs respectively before the column name.
No
filter
String
Specify the values to filter by in a specific column. Usage: column1=val1[,column2=val2[,..]]
raw-units
Boolean
Print values in raw units such as bytes, and seconds.
No
Human-readable format, for example, 1KiB 234MiB 2GiB.
no-header
Boolean
Don't show column headers in the output,
No
verbose
Boolean
Show all columns in the output.
No
Delete an object store bucket
Command: weka fs tier s3 delete
Use the following command line to delete an object-store bucket:
weka fs tier s3 delete <name>
Parameters
Name
Type
Value
Limitations
Mandatory
Default
name
String
Name of the object store bucket to delete.
Must be a valid name
Yes
Last updated